Ultimate Guide to the NSE4_FGT-6.4 - Latest Mar 24, 2022 Edition Available Now
2022 Updated Verified Pass NSE4_FGT-6.4 Exam - Real Questions and Answers
How to Prepare For Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Preparation Guide for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Introduction for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
This guide provides a step by step framework of the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional course exam including a broad array of essentials of the test, the exam design, themes, test complexities and readiness techniques, and the intended interest group profile. Thus, we prepare various FORTINET NSE4_FGT-6.4 exam dumps as we understand understudy determinations. Our content, helps candidates total assessments.
Fortinet released its initial product, FortiGate, a firewall, in 2002, succeeded by anti-spam and anti-virus software. FortiGate was upgraded to use application-specific integrated circuit (ASIC) architecture.
The Network Security Professional designation recognizes your ability to install and manage the day-to-day configuration, monitoring, and operation of a FortiGate device to support specific corporate network security policies.
We recommend this exam for network and security professionals who are involved in the day-to-day management, implementation, and administration of a security infrastructure using FortiGate devices
Originally, the FortiGate was a material, rack-mounted product but later on, it became available also as a virtual appliance able to run on virtualization platforms like VMware vSphere. Fortinet also joined its network security offerings, including firewalls, anti-spam and anti-virus software, into a single product. Fortinet began developing its Security Fabric architecture in April 2016, so many network security products could communicate as one program. The same year, the company supplemented Security Information and Event Management (SIEM) products. In September 2016, the company declared it would combine the SIEM products with the security systems of other merchants.
The Network Security Professional (Fortinet NSE4_FGT-6.4) course identifies a person's capability to establish and maintain the day-to-day configuration, monitoring, and operation of a FortiGate device to carry out particular corporate network security policies.
If you are a customer or a public user, you must first create an account on the NSE Institute. You must use your company email address to register. You must purchase your training though your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
With 46,000+ active user certifications, the Fortinet Network Security Expert certification program is earning notable critical mass and industry attention. The value of the Fortinet NSE designation is verified every day by security specialists in the field and by trusted sources.
After finishing this course, the candidate will be able to:
- Deploy the proper operation mode for any network
- Configure SD-WAN to load balance traffic amid multiple WAN links efficiently
- Stop hacking and denial of service (DoS) attacks
- Partition FortiGate into two or more virtual devices, each operating as an autonomous FortiGate, by configuring virtual domains
- Authorize an IPsec VPN tunnel connecting two FortiGate devices
- Diagnose declined IKE exchanges
- Run packets using policy-based and static routes for multipath and load-balanced deployments
- Execute a meshed or partially redundant VPN
- Recognize the features of the Fortinet Security Fabric
- Deploy implicit and explicit proxy with firewall policies, authentication, and caching
- Examine traffic transparently, forwarding as a Layer 2 device
- Examine a FortiGate route table
- Implement application control methods to monitor and control network applications that might use standard or non-standard protocols and ports
- Diagnose and repair common problems
- Propose Fortinet Single Sign-On access to network services, integrated with Microsoft Active Directory
- Deploy FortiGate devices as an HA cluster for fault tolerance and high performance
- Manage network access to configured networks using firewall policies
- Utilize the GUI and CLI for management
- Verify users using firewall policies
- Understand encryption uses and certificates
- Examine SSL/TLS-secured traffic to stop encryption used to bypass security policies
- Configure security profiles to offset threats and ill-usage, including viruses, torrents, and improper websites
- Gather and understand log entries
- Implement port forwarding, source NAT, and destination NAT
Use FORTINET NSE4_FGT-6.4 practice exam and FORTINET NSE4_FGT-6.4 practice exams to prepare for the exam.
NEW QUESTION 48
Refer to the exhibit.
The exhibit contains a network diagram, firewall policies, and a firewall address object configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-user2. Remote-user2 is still able to access Webserver.
Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.)
- A. Enable match vip in the Deny policy.
- B. Disable match-vip in the Deny policy.
- C. Set the Destination address as Web_server in the Deny policy.
- D. Set the Destination address as Deny_IP in the Allow-access policy.
Answer: A,C
NEW QUESTION 49
Refer to the exhibit.
Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?
- A. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - B. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - C. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - D. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.
Answer: B
NEW QUESTION 50
Refer to the exhibit.
Given the interfaces shown in the exhibit. which two statements are true? (Choose two.)
- A. port1-vlan and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.
- B. Traffic between port2 and port2-vlan1 is allowed by default.
- C. port1 is a native VLAN.
- D. port1-vlan10 and port2-vlan10 are part of the same broadcast domain.
Answer: A,B
NEW QUESTION 51
Which two statements are true about the FGCP protocol? (Choose two.)
- A. Runs only over the heartbeat links
- B. Not used when FortiGate is in Transparent mode
- C. Elects the primary FortiGate device
- D. Is used to discover FortiGate devices in different HA groups
Answer: A,D
NEW QUESTION 52
Examine this FortiGate configuration:
How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?
- A. It authenticates the traffic using the authentication scheme SCHEME1.
- B. It always authorizes the traffic without requiring authentication.
- C. It authenticates the traffic using the authentication scheme SCHEME2.
- D. It drops the traffic.
Answer: A
Explanation:
Explanation
"What happens to traffic that requires authorization, but does not match any authentication rule? The active and passive SSO schemes to use for those cases is defined under config authentication setting"
NEW QUESTION 53
Which two inspection modes can you use to configure a firewall policy on a profile-based next-generation firewall (NGFW)? (Choose two.)
- A. Proxy-based inspection
- B. Certificate inspection
- C. Full Content inspection
- D. Flow-based inspection
Answer: A,D
NEW QUESTION 54
Refer to the exhibit.
The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration.
How will FortiGate handle user authentication for traffic that arrives on the LAN interface?
- A. Authentication is enforced at a policy level; all users will be prompted for authentication.
- B. Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.
- C. If there is a full-through policy in place, users will not be prompted for authentication.
- D. Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials.
Answer: A
NEW QUESTION 55
Refer to the exhibit.
Review the Intrusion Prevention System (IPS) profile signature settings. Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile?
- A. Traffic matching the signature will be silently dropped and logged.
- B. The signature setting uses a custom rating threshold.
- C. Traffic matching the signature will be allowed and logged.
- D. The signature setting includes a group of other signatures.
Answer: C
NEW QUESTION 56
Refer to the exhibit.
Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)
- A. This security fabric topology is a logical topology view.
- B. There are five devices that are part of the security fabric.
- C. There are 19 security recommendations for the security fabric.
- D. Device detection is disabled on all FortiGate devices.
Answer: A,D
Explanation:
Explanation/Reference:
https://www.fast2test.com/NSE4_FGT-6.4-practice-test.html 3
Valid Fast2test NSE4_FGT-6.4 Exam PDF Dumps - New NSE4_FGT-6.4 Real Exam Questions
NEW QUESTION 57
Which two statements about IPsec authentication on FortiGate are correct? (Choose two.)
- A. A certificate is not required on the remote peer when you set the signature as the authentication method.
- B. FortiGate supports pre-shared key and signature as authentication methods.
- C. Enabling XAuth results in a faster authentication because fewer packets are exchanged.
- D. For a stronger authentication, you can also enable extended authentication (XAuth) to request the remote peer to provide a username and password
Answer: B,D
NEW QUESTION 58
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. This setup requires at least two firewall policies with the action set to IPsec.
- B. This is a redundant IPsec setup.
- C. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
- D. Dead peer detection must be disabled to support this type of IPsec setup.
Answer: B,C
NEW QUESTION 59
FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax.
Which two syntaxes are correct to configure web rating for the home page? (Choose two.)
- A. www.example.com:443
- B. example.com
- C. www.example.com
- D. www.example.com/index.html
Answer: B,C
Explanation:
FortiGate_Security_6.4 page 384
NEW QUESTION 60
An administrator has a requirement to keep an application session from timing out on port 80. What two changes can the administrator make to resolve the issue without affecting any existing services running through FortiGate? (Choose two.)
- A. Create a new service object for HTTP service and set the session TTL to never
- B. Set the session TTL on the HTTP policy to maximum
- C. Set the TTL value to never under config system-ttl
- D. Create a new firewall policy with the new HTTP service and place it above the existing HTTP policy.
Answer: A,C
NEW QUESTION 61
View the exhibit:
Which the FortiGate handle web proxy traffic rue? (Choose two.)
- A. port-VLAN1 is the native VLAN for the port1 physical interface.
- B. port1-VLAN10 and port2-VLAN10 can be assigned to different VDOMs.
- C. Broadcast traffic received in port1-VLAN10 will not be forwarded to port2-VLAN10.
- D. Traffic between port1-VLAN1 and port2-VLAN1 is allowed by default.
Answer: B,C
NEW QUESTION 62
Exhibit:
Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?
- A. IP-based authentication is enabled
- B. Route-based authentication is enabled
- C. Session-based authentication is enabled.
- D. Policy-based authentication is enabled
Answer: C
NEW QUESTION 63
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 fails to come up. The administrator has also re-entered the pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes will bring phase 1 up? (Choose two.)
- A. On both FortiGate devices, set Dead Peer Detection to On Demand.
- B. On HQ-FortiGate, set IKE mode to Main (ID protection).
- C. On Remote-FortiGate, set port2 as Interface.
- D. On HQ-FortiGate, disable Diffie-Helman group 2.
Answer: B,C
NEW QUESTION 64
If Internet Service is already selected as in a firewall policy, which other configuration objects can be added to the Source filed of a firewall policy?
- A. FQDN address
- B. Once Internet Service is selected, no other object can be added
- C. User or User Group
- D. IP address
Answer: B
NEW QUESTION 65
Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?
- A. To generate logs
- B. To allow for out-of-order packets that could arrive after the FIN/ACK packets
- C. To remove the NAT operation
- D. To finish any inspection operations
Answer: B
NEW QUESTION 66
An administrator Is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A.
the local quick mode selector is 192.160.1.0/24 and the remote quick mode selector is 192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?
- A. 192.168.2.0/24
- B. 192.168.3.0/24
- C. 192.168.1.0/24
- D. 192.168.0.0/24
Answer: D
NEW QUESTION 67
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up. but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up?
- A. On Remote-FortiGate, set Seconds to 43200.
- B. On HQ-FortiGate, enable Auto-negotiate.
- C. On HQ-FortiGate, enable Diffie-Hellman Group 2.
- D. On HQ-FortiGate, set Encryption to AES256.
Answer: D
NEW QUESTION 68
Examine the two static routes shown in the exhibit, then answer the following question.
Which of the following is the expected FortiGate behavior regarding these two routes to the same destination?
- A. FortiGate will use the port1 route as the primary candidate.
- B. FortiGate will route twice as much traffic to the port2 route
- C. FortiGate will only actuate the port1 route in the routing table
- D. FortiGate will load balance all traffic across both routes.
Answer: A
Explanation:
Explanation
"If multiple static routes have the same distance, they are all active; however, only the one with the lowest priority is considered the best path."
NEW QUESTION 69
Refer to the exhibit.
The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?
- A. Change password
- B. Enable restrict access to trusted hosts
- C. Enable two-factor authentication
- D. Change Administrator profile
Answer: D
NEW QUESTION 70
Refer to the exhibit.
Review the Intrusion Prevention System (IPS) profile signature settings. Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile?
- A. Traffic matching the signature will be allowed and logged.
- B. The signature setting uses a custom rating threshold.
- C. The signature setting includes a group of other signatures.
- D. Traffic matching the signature will be silently dropped and logged.
Answer: D
NEW QUESTION 71
Refer to the exhibit.
The exhibits show a network diagram and the explicit web proxy configuration.
In the command diagnose sniffer packet, what filter can you use to capture the traffic between the client and the explicit web proxy?
- A. 'host 192.168.0.2 and port 8080'
- B. 'host 10.0.0.50 and port 8080'
- C. 'host 10.0.0.50 and port 80'
- D. 'host 192.168.0.1 and port 80'
Answer: A
NEW QUESTION 72
......
How much Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam Cost
The cost of the Network Security Professional (Fortinet NSE4_FGT-6.4) Exam is 400 USD. For more information related to exam price, please visit the official website AWS Website as the cost of exams may be subjected to vary county-wise.
Dumps Moneyack Guarantee - NSE4_FGT-6.4 Dumps Approved Dumps: https://www.testkingfree.com/Fortinet/NSE4_FGT-6.4-practice-exam-dumps.html