TestKingFree HPE7-A03 dumps & Aruba Certified Professional Sure Practice with 70 Questions
New HPE7-A03 Exam Questions| Real HPE7-A03 Dumps
HP HPE7-A03 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 17
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (Ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
ACME Retail is using 4-post racks. Which rack mounting kit is better suited for this project?
- A. optional Aruba 2-pet Rack Mount Kit
- B. included Rack Mounting Kit
- C. optional Aruba Universal 4-post Rack Mount Kit
- D. optional Third Party 4-port Rack Mount Kit
Answer: C
Explanation:
For a large multinational retail company like ACME Retail that uses 4-post racks in their network infrastructure, the most suitable rack mounting kit would be the optional Aruba Universal 4-post Rack Mount Kit. This kit is designed to provide a secure and stable mounting solution for networking equipment in 4-post rack systems, which are commonly used in enterprise environments for their robustness and ability to support heavier equipment. The Aruba Universal 4-post Rack Mount Kit is versatile and designed to fit a wide range of Aruba switches and networking devices, making it an ideal choice for ACME Retail's project, ensuring compatibility and ease of installation across their various locations.
NEW QUESTION # 18
What should be Included in an Executive Summary? (Placethe correct Items into the let at the right Order is no: Important Not all cottons win be used)
Answer:
Explanation:
Explanation:
For an Executive Summary, typically the following items should be included:
* Brief Summary
* Contact Information
* High-Level Design
* Purpose of the Document
* Recommendations
* Scope
* Target Audience
NEW QUESTION # 19
XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and
1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites byenhancingwired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, S0-8ranch. loT
* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)
- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally
- wireless and wired authentication for the health centers will be handled locally
- wireless and wired authentication tor the clinics will be authenticated against the main hospital NAC
- staff ustrs/devices should able to visit any site and haw the same experience
- support 35k devices
Locations:
- XYZ Regional Hospital is located in City 1 - 15k devices
- Dila Health center is located in City 2 - 8k devices
- Mount Health Center is located in City 3 - 5k devices
- Rock Health Center is located in City 4 - 4k devices
-125 branch clinics are located at different locations across the US - 2k devices Which solution meets the customer's requirements?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Option B in the provided selections outlines a configuration that includes an Aruba ClearPass Policy Manager as a Publisher for the main DC and as a Standby Publisher for the DR, with subscriber servers allocated to the main hospital and health centers. This setup is likely to match the requirement for a fully redundant NAC solution, with local handling of authentication for the main hospital and health centers, and centralized authentication for the clinics. The inclusion of VMs (Virtual Machines) as subscribers for health centers suggests scalability and flexibility for future expansion. The provision of 35k access licenses aligns with the support for 35k devices across all locations.
NEW QUESTION # 20
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decided that wired headless devices would be authenticated using Mac Authentication and would have RADIUS attributes sent back to the NAD to assign VLAN and port access parameters to the authentication session on the switch port.
What would be critical in making this a successful deployment? {Select two.)
- A. Mobility Gateway
- B. DHCP
- C. Airwave
- D. ClearPass
Answer: B,D
Explanation:
For a successful deployment of MAC Authentication with RADIUS attributes for VLAN and port access parameters, ClearPass is critical. ClearPass Policy Manager offers advanced network access control, policy management, and is capable of handling MAC Authentication effectively. It can communicate with the Network Access Devices (NADs) to apply the correct access policies based on RADIUS attributes received during the authentication process. DHCP is also crucial in this setup for dynamically assigning IP addresses to authenticated devices, ensuring that they can connect to the network with the appropriate network settings.
Together, ClearPass and DHCP services form the backbone of a secure, manageable, and dynamically segmented network infrastructure, ensuring devices are authenticated and receive the correct network configuration.
NEW QUESTION # 21
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on best practices, what should you recommend as the correct optic type for the connection between the IDF and the technical rooms?
- A. Aruba 106 SFP+ LC SR 300 m MMF Transceiver
- B. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
- C. Aruba 100 LC BID! 40 km-0 1330/1270 XCVR
- D. Aruba 10GBASE-T SFP- RJ-45 30 m Cat6A Transceiver
Answer: A
Explanation:
For the connection between the IDF and the technical rooms, which requires support for lengths between 100 and 150 meters (320 and 500 ft), the Aruba 10G SFP+ LC SR 300 m MMFTransceiver is the recommended optic type. This transceiver is designed for short-range multimode fiber connections and can support distances up to 300 meters, making it suitable for the specified lengths within the technical rooms on the cruise ship. The SR (Short Range) designation ensures that this transceiver is optimized for the distances involved in connecting the IDFs to the technical rooms, providing high-speed 10GbE connectivity to meet the increased network traffic demands. This choice aligns with the cruise line company's requirements for a sustainable and cost-effective network refresh that accommodates future expansion without extensive unused capacities.
NEW QUESTION # 22
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would take to ensure redundant RADIUS resources in each of their three geographical regions (AMER. EMEA. and APAC) A large office location Is available In each region with sufficient VMware resources available.
- Each region has 5.000 clients, all of which will need to do either 802.1 x wired or wireless authentications as well as 802.1 x authentication for a single personal device on Wi-Fi.
* All of the non-personal devices will also need to validate health with a local agent.
* A total of 500 guests are expected to be connected on average with a maximum of 700 simultaneous connections making use of Guest Portal for access to the Internet.
* TACACS authentication will also be configured for a total of 1,200 evenly dispersed NADs.
In order to support virtual IPs and server redundancy in each region how many Virtual Policy Manager Licenses will be needed?
- A. three licenses. C3000V
- B. six licenses. C3000V
- C. three licenses. C2000V
- D. six licenses. C2000V
Answer: B
Explanation:
In a scenario requiring redundant RADIUS resources across three geographical regions, with the scale of operations as described, opting for six C3000V Virtual Policy Manager licenses would ensure adequate capacity and redundancy. The C3000V model is designed to cater to larger deployments, offering high-capacity RADIUS services suitable for environments with thousands of clients and devices requiring authentication and health validation. By deploying two C3000V instances in each region (AMER, EMEA, and APAC), the financial institution can achieve both high availability and load balancing, ensuring that authentication services remain uninterrupted and efficient, even in the event of a server failure or during maintenance periods. This approach aligns with best practices for enterprise network design, emphasizing resilience and reliability in critical infrastructure components like authentication services.
NEW QUESTION # 23
The clients existing network isexperiencing trouble with voice occasionally dropping out on phone calls between office locations, it Is determined that no packet loss is occurring and QOS is likely the cause. With what phenomenon Is the client currently experiencing issues?
- A.
- B.
- C.
Answer: A
Explanation:
The client is experiencing issues with Jitter, as depicted in Option B. Jitter refers to the variation in time between packets arriving, caused by network congestion, timing drift, or route changes. In voice communications, jitter can manifest as the occasional dropping out of voice on phone calls because the variable delay can affect the steady stream of voice packets needed for a clear conversation. Even when there is no packet loss, high levels of jitter can significantly impact the quality of Voice over IP (VoIP) calls.
Quality of Service (QoS) settings are essential in managing jitter, as they can prioritize voice traffic over other types of data, ensuring that voice packets are delivered consistently and in the correct order to minimize delays and prevent call quality degradation. Aruba Campus Access solutions would typically include QoS features to manage and mitigate jitter on the network.
NEW QUESTION # 24
Matchthe deployment typeto the estimated numberof APs.
Answer:
Explanation:
Explanation:
Capacity based design with low to mid density - 100,000 ft² / 900 m² building 100,000/10,000 = 10 APsCoverage based design - 100,000 ft² / 900 m² building 100,000/2,500 = 40 APsHigh-capacity design -
100,000 ft² / 900 m² building 100,000/1,500 = 67 APsVery low-density, low coverage - 100,000 ft² / 900 m² building 100,000/500 = 20 APs The deployment of Access Points (APs) in a wireless network design depends on the required density and coverage needed:
* Capacity based design with low to mid densityis often used in environments like office spaces where there is a moderate amount of users and devices. Fewer APs are required compared to high-density scenarios.
* Coverage based designtypically requires more APs than a low-density capacity design because the goal is to provide a wireless signal to all areas, regardless of the number of users.
* High-capacity designis for environments like stadiums or conference centers where a high number of users are expected to be concentrated in a particular area. Thus, a higher number of APs is needed to accommodate the user load.
* Very low-density, low coverageis suitable for areas that have few users over a large space, such as warehouses or outdoor areas. Fewer APs are required as the focus is on covering space rather than supporting a large number of devices.
NEW QUESTION # 25
You aregoingwith a 3-tierdesign and need to calculate the oversubscription ratio ontheAccess. Distribution.
Core, and ToR Layer. Whatis a suitable oversubscriptionratio for each layer?
Answer:
Explanation:
Explanation:
Access - 20:1Aggregation - 4:1Core - 2:1
ToR - Not typically applicable in a 3-tier design; however, if ToR were used, it could be 24:1 or better depending on the specific design and requirements.
NEW QUESTION # 26
which documentation resources con be used for finding validated information on Aruba products that assist the architect in building the solution design? (Select three.)
- A. Gartner annual reports
- B. configuration guides
- C. competitive documentation
- D. product reviews (CNET,Network World)
- E. validated Solution Guide
- F. datasheets
Answer: B,E,F
Explanation:
When seeking validated information on Aruba products to assist in building a solution design, the most reliable resources include configuration guides (Option B), datasheets (Option C), and validated Solution Guides (Option F). Configuration guides provide detailed instructions and best practices for setting up and optimizing Aruba products, ensuring their proper integration into the network infrastructure. Datasheets offer concise overviews of product specifications, features, and capabilities, allowing architects to assess product suitability for specific requirements. Validated Solution Guides compile comprehensive information on deployingAruba solutions in various scenarios, ensuring that the solution design is based on proven methodologies and recommended practices, thereby enhancing the reliability and performance of the network solution.
NEW QUESTION # 27
identify the stakeholders when gathering information for the network design and new IDF/MDF design.
(Select two.)
- A. Chief Financial Officer
- B. Network Operations manager
- C. Facility manager
- D. Help desk manager
Answer: B,D
Explanation:
When designing a network and considering new Intermediate Distribution Frame/Main Distribution Frame (IDF/MDF) deployments, it's essential to gather information from various stakeholders to ensure the design meets all operational and organizational requirements. According to Aruba Campus Access learning resources, the Help Desk Manager and Network Operations Manager are crucial stakeholders in this process. The Help Desk Manager provides insights into common issues, user complaints, and service requests, which can influence network design decisions to improve user experience and operational efficiency. The Network Operations Manager, on the other hand, offers a technical perspective on network management, maintenance requirements, and operational challenges. Engaging with these stakeholders ensures that the network design is aligned with both user needs and technical operational standards, contributing to a more resilient, efficient, and user-friendly network infrastructure.
NEW QUESTION # 28
Which licenses are needed in order to use the UXl Client on Zebra (Devices? (Select two.)
- A. Wireless Insights
- B. UXl Agent Subscription
- C. UXI Cloud Subscription
- D. UXl LTE Subscription
Answer: B,C
Explanation:
To utilize the UXI Client on Zebra Devices, the necessary licenses include the UXI Cloud Subscription (Option A) and the UXI Agent Subscription (Option B). The UXI Cloud Subscription provides access to the UXI platform's cloud-based analytics and insights, facilitating the monitoring and management of network performance and user experience. The UXI Agent Subscription is required for each Zebra device, enabling it to run the UXI Client software that collects and sends network performance data to the UXI cloud platform.
Together, these licenses empower organizations to enhance network visibility and improve the user experience on Zebra devices within their networks.
NEW QUESTION # 29
Which is true when it comes to Aruba Central licensing for gateways? (Select two.)
- A. Aruba Gateway normallicensing is subdivided into three categories: Foundation. Advanced, and Foundation Base.
- B. SD-WAN Gateway functionality requires security licensing.
- C. Aruba WLAN Gateway licenses allow normal SD-Branch features within a campus.
- D. Aruba SD-8ranch Gateway licenses allow normal WLAN Gateway features within a campus.
Answer: B,D
Explanation:
In the context of Aruba Central licensing for gateways, it is true that SD-WAN Gateway functionality requires a specific security licensing (Option B), which is essential for enabling advanced security features and capabilities in an SD-WAN deployment. This includes functionalities like firewall, threat management, and secure VPN connections. Additionally, Aruba SD-Branch Gateway licenses allow for the use of standard WLAN Gateway features within a campus environment (Option C). This means that with an SD-Branch Gateway license, the gateway can handle traditional WLAN management and security tasks, in addition to its SD-WAN capabilities, providing a unified solution for both branch and campus deployments.
NEW QUESTION # 30
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility willbe retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project.
The customer is underserved by its existing L2-based network Infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be In use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services.
The client has decided that more critical switch stacks supporting Contact Center resources will need to support greater than 600W of CL4 PoE and have redundant power supplies These stacks will have approximately six members.
What would be the most economical choice Aruba switch series to meet these requirements?
- A. Aruba CX 6100
- B. Aruba CX 6400
- C. Aruba CX6200M
- D. Aruba CX6300F
Answer: D
Explanation:
The Aruba CX 6300F Switch Series is well-suited for environments requiring high PoE power and redundancy in power supplies, especially for critical applications like supporting contact center resources. This series offers robust PoE capabilities, often exceeding 600W of Class 4 PoE power, making it ideal for powering multiple high-powered devices. Additionally, the Aruba CX 6300F supports stack configurations and redundant power supplies, ensuring high availability and reliability for critical network infrastructures. Its economical pricing, combined with high performance and reliability, makes it the most cost-effective choice for the client's requirements.
NEW QUESTION # 31
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the best practices and customer requirements, what is the correct WLAN approach?
- A. Aruba OS10 AP and gateway deployment
- B. Instant OS 8 deployment
- C. Aruba OS8 campus deployment
- D. Aruba OS10 AP only deployment
Answer: B
Explanation:
For ACME Retail, which has multiple locations and a mix of environments including high-ceiling warehouses and retail spaces, an Aruba Instant OS 8 deployment is a suitable WLAN approach. Aruba Instant OS provides a controller-less architecture, which simplifies the deployment and management of the wireless network, especially across multiple sites. This approach enables ACME Retail to manage their entire wireless network from a single interface without the need for dedicated hardware controllers, reducing costs and complexity.
Instant OS also supports advanced features like Adaptive Radio Management and ClientMatch to ensure optimal performance in diverse environments, making it an effective solution for ACME's varied locations and requirements.
NEW QUESTION # 32
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed or ?5Gbps over 0M4 MM Tiber They would also like to keep the stacking cabling cost to a minimum.
Which switch series would most economically accomplish these requirements?
- A. Aruba 6400 Switch Series
- B. Aruba 6200F Switch Series
- C. Aruba6300F Switch Series
- D. Aruba6100SwitchSeries
Answer: C
Explanation:
The Aruba 6300F Switch Series is designed to meet the needs of modern, full-stack wired and wireless networks with a focus on cost-effectiveness, performance, and scalability. This series supports high-speed connectivity options, including 25Gbps over OM4 MM fiber, making it suitable for the client's requirement to manage two wiring closets as a single stack with a total of 10 switches. The 6300F series also offers the flexibility of modular uplinks and stacking capabilities, ensuring that the client's needs for minimum transport speed and economic efficiency are met. Additionally, the Aruba 6300F series is known for its energy efficiency and lower operational costs, further contributing to its economic value.
NEW QUESTION # 33
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decides that they would like for all of their exposed printer, conference room, and VoIP phone connections to be controlled by a stateful firewall What could be planned to ensure that these ports will meet the customer's requirements?
- A. Web Portal
- B. Multi-Zone
- C. Airgroup
- D. Tunneled Node
Answer: D
Explanation:
To control exposed printer, conference room, and VoIP phone connections with a stateful firewall, utilizing Tunneled Node functionality would be effective. Tunneled Node allows for the encapsulation of wired Ethernet traffic into a user-based tunnel, similar to how wireless traffic is handled. This means that traffic from these devices can be sent through a centralized controller where stateful firewall policies can be applied. This setup ensures that the specific ports used by these devices are subjected to the same level of security scrutiny and policy enforcement as wireless traffic, aligning with the client's requirements for a secure and controlled network environment.
NEW QUESTION # 34
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has asmall help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
What should the architect be concerned about regarding the solution? (Select two.)
- A. IP addresses
- B. multiple locations
- C. Regulatory Domains
- D. Active Directory
Answer: B,C
Explanation:
In designing a network solution for ACME Retail, which operates across various regions in the US and Canada, the architect must consider Regulatory Domains and the challenges posed by multiple locations.
Regulatory Domains are crucial because wireless standards and allowed frequencies vary by country, affecting how WLAN equipment is configured and deployed. Compliance with local regulations is essential to avoid legal issues and ensure optimal network performance. The challenge of multiple locations involves ensuring consistent, high-quality network service across all sites, despite geographical distances and site-specific characteristics. This requires a scalable, flexible network architecture that can be centrally managed while accommodating the unique needs of each location.
NEW QUESTION # 35
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Which two projects does the customer have in the planning state? (Select two)
- A. new POS system
- B. VoIP upgrade
- C. Inventory Control System
- D. kiosks/display station
Answer: B,C
Explanation:
ACME Retail is in the planning stages of upgrading their current PBX system to a VoIP system, as indicated by their intention to move away from the existing PBX system later in the year. This upgrade is part of their overall network infrastructure overhaul to incorporate modern bestpractices. Additionally, the company is facing challenges with their current inventory control system, particularly with Zebra barcode scanners having signal issues throughout the stores, making monthly inventory processes difficult. Improving the inventory control system to achieve almost real-time inventory for their online service is a critical aspect of their growth and cost-cutting strategy, hence it's in the planning stage as well.
NEW QUESTION # 36
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks.
What would you advise as the most cost-efficient solution?
- A. Standardize on Aruba 6100 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- B. Standardize on Aruba 6300 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- C. Standardize on Aruba 6200 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- D. Standardize on Aruba 6000 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
Answer: B
Explanation:
Given the need to increase the security of the wired network infrastructure while being cost-efficient, advising the cruise line company to standardize on Aruba 6300 switches for the access layer is the most appropriate solution. The Aruba 6300 Series offers advanced features suitable for such environments, including high-performance, scalability, and enhanced security capabilities. Adding a cluster of 9240 Gateways for implementing central overlay networks on a User-Based Tunneling (UBT) basis further strengthens the network's security posture. This setup supports dynamic segmentation, which allows for the enforcement of consistent policies and secure access across the network, irrespective of the user or device type. This architecture not only meets the increased security requirements set forth by the cruise line's CSO but also aligns with the company's existing infrastructure and future refresh plans, ensuring cost-efficiency and sustainability.
NEW QUESTION # 37
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope What would be needed to ensure proper licensing of the solution?
- A. Qty 4 Meridian Blue Dot subscriptions
- B. Qty 1 Meridian Blue Dot subscription
- C. Qtyl Meridian Tracking subscription
Qty 1 Meridian Blue Dot subscription - D. Qty 4 Meridian Map subscriptions
Qty 4 Meridian Blue Dot subscriptions
Answer: B
Explanation:
For implementing Blue Dot wayfinding in the carpeted office space of the multinational financial institution, a Meridian Blue Dot subscription is essential. Meridian's Blue Dot wayfinding technology allows for real-time indoor navigation, which can enhance the experience of employees and visitors by providing turn-by-turn directions within the office space. Given that the requirement is specifically for the carpeted office space and not for the retail floors, a single Meridian Blue Dot subscription would be the starting point to enable this functionality. This subscription would cover the deployment of the Blue Dot technology across the specified office floors, allowing for the integration of this feature into the institution's app or digital platform for indoor navigation. Additional subscriptions, such as Meridian Map subscriptions, might be required for more extensive mapping needs, but based on the provided options and the specific request for Blue Dot functionality, a single Blue Dot subscription would be the most direct answer.
NEW QUESTION # 38
What is the simple difference between a main distribution framework (MOF) closet and an intermediate distribution framework (IDF) closet?
- A. MDFs only connect to other MDFs. and IDFs only connect to other IDFs.
- B. MDF Is a term used in Europe whereas the Americas refer to all network closets as IDFs in their documentation.
- C. MOF is the point where traffic egresses the campus network, and IDFs distribute that connectivity throughout the building.
- D. MDFs always have larger rooms than IDFs.
Answer: C
Explanation:
In network design, the Main Distribution Frame (MDF) and Intermediate Distribution Frame (IDF) are critical components of the network infrastructure. The MDF is the primary hub of the network, often where services from outside the campus or building enter and get distributed. It acts as a central point for network distribution. On the other hand, IDFs are secondary hubs situated throughout the building or campus, extending connectivity provided by the MDF to various endpoints or areas within the building. The simple difference between them lies in their roles within the network infrastructure: the MDF serves as the main point of network ingress and egress, while IDFs are used to further distribute the network to specific locations or floors within the building.
NEW QUESTION # 39
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?
- A. Aruba 106 SFP- LC SR 300 m MMF Transceiver
- B. Aruba 10G LC BiDi 40 km-D 1330/1270 XCVR
- C. Aruba 10GBASE-T SFP- RJ--35 30 m Cat6A Transceiver
- D. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
Answer: A
Explanation:
For the connection between the IDF and the cabins, which requires supporting distances up to 60 meters on OM2 fiber, the most appropriate optic type is the Aruba 10G SFP+ LC SR 300 m MMF Transceiver. This transceiver is compatible with multi-mode fiber (MMF) and is capable of supporting the required distance for connections to the cabins, making it a suitable choice based on the company's existing cabling structure and the need for 10GbE uplink capabilities to manage increased network traffic. The SR (Short Range) designation indicates that this transceiver is optimized for short to medium distances, which aligns with the maximum
60-meter distance from IDF to cabins, ensuring reliable and high-speed connectivity for the ship's LAN infrastructure within the given physical constraints.
NEW QUESTION # 40
What are the advantages of using a vSX-pair instead of two discrete switches to connect servers, storage, firewalls, and other workloads?
- A. You can save hall the number oflicenses needed tor AFC.
- B. Both members in a VSX-paircan be upgraded without any downtime for the workload.
- C. VMWare-Most can be connected with or without using LACP. regardless of their license.
- D. The setup is much easier since both switches are sharing the same configuration.
Answer: B
Explanation:
One of the key advantages of using a Virtual Switching Extension (VSX) pair instead of two discrete switches for connecting servers, storage, firewalls, and other workloads is that bothmembers in a VSX pair can be upgraded without any downtime for the workload (Option C). VSX technology provides advanced high availability features that allow for non-disruptive software upgrades, meaning that one switch in the VSX pair can be upgraded while the other continues to handle network traffic, thereby maintaining continuous operation of the connected workloads. This seamless failover capability ensures that there is no interruption to the critical services running on the network, making VSX an ideal solution for environments where uptime is paramount.
NEW QUESTION # 41
A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of No-Stair Inc.' has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company Is minimally engaged In their LAN refresh so the CTO of the company has shared the information below Current WLAN Infrastructure Is based on the 802.1 In "WlF14Less" access-points series (both model
2013-INT (2.4 only Internal antenna) and model 2019-EXT (dual-band external antenna only)). These AP models are standalone without any centralized management. Last year 'No-Stair InC ran a project called secure. It' ensuring that all needed network security was Implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA infrastructure to handle the Increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that
'No-Stair Inc.' will continue to use bridged SSIDs. with local breakout into different VLANs.
The CTO of No-Stair Inc.' understands the need for you to ask additional questions to deliver the design The questions may be sent in written form and will be answered within two weeks.
Which additional question is correct in order to collect needed information for the WLAN design?
- A. Is there a current RF survey report that you can share?
- B. What type of fiber connection Is used between the core and access layer switches?
- C. Who is the campus switch vendor?
- D. IS there enough cooling In the MDF?
Answer: A
Explanation:
An RF (Radio Frequency) survey report is crucial for WLAN design as it provides detailed information about the current wireless environment, including signal strengths, interference sources, coverage gaps, and the effectiveness of the existing WLAN infrastructure. For a company like 'No-Stair Inc.' that is planning to refresh its WLAN across a global footprint, understanding the current RF conditions in each location is essential. This information helps in designing a WLAN infrastructure that can meet the specific needs of different areas within the locations, such as the retail area and warehouse, ensuring optimal coverage, performance, and user experience. An RF survey report would allow the designer to make informed decisions regarding the placement of new access points, the selection of appropriate antennas, and the configuration of WLAN parameters to improve coverage and capacity while minimizing interference.
NEW QUESTION # 42
......
HPE7-A03 Braindumps – HPE7-A03 Questions to Get Better Grades: https://www.testkingfree.com/HP/HPE7-A03-practice-exam-dumps.html
Get New HPE7-A03 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=110tdnR5oEAfU7KvdiMYsgbUJ_J2LDeN_