TestKingFree 301 Dumps PDF - 100% Passing Guarantee
301 Braindumps Real Exam Updated on Nov 27, 2021 with 49 Questions
What is the duration of the 301a - LTM Technology Specialist
- Passing Score: 720
- Number of Questions: 54
- Language: English
- Length of Examination: 130 minutes
- Format: Multiple choices, multiple answers
Who should take the 301a - LTM Technology Specialist
The 301a - LTM Technology Specialist affirmation is a globally perceived approval that recognizes people who procure it gangs abilities in architectecture. In the event that an applicant needs huge improvement in profession development needs upgraded information, abilities, and gifts. The assessment is proposed for people who play out an arrangements engineer job and have at least one years of involved experience planning accessible, cost-effective, deficiency lenient, and adaptable circulated frameworks on F5.
NEW QUESTION 17
Which are immediate results of entering the following command: b pool PoolA . { lb method predictive member 10.10.1 .1:80 member 10.10.1.2:80 }
- A. The /config/bigip.cinf file is updated to include a definition for the pool named PoolA.
- B. No changes will take place since the command is missing the monitor component for PoolA.
- C. a new pool is available for association with any iRule or virtual server.
- D. Requests sent to this BIG-IP system with a destination port of 80 are load-balanced between the members of Pool
Answer: C
NEW QUESTION 18
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. Only 2U BIG-IP Platform have an option of a second power supply.
- B. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- C. All current BIG-IP platform can perform hardware compression.
- D. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
- E. The 1600 hosts more ports than the 3900.
Answer: B,D
NEW QUESTION 19
Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)
- A. the client's TCP port
- B. the client's IP netmask
- C. the client's browser's preferred language
- D. the client's IP address
- E. the client's router's IP address
- F. the client IP fragment offset
Answer: A,C,D
NEW QUESTION 20
Given the configuration shown below, if a connection request arrived on the BIG-IP with a source address of 200.10.10.10:1050 and a destination of 150.10.10.75:80, what would the source IP address of the associated packet be when it arrived on the choosen member of the web_pool self
150.10.10.1 { netmask 255.255.255.0 unit I floating enable vlan external allow tcp https } self
10.10.1.1 { netmask 255.255.255.0 unit I floating enable vlan internal allow default } pool web_pool { member 10.10.1.11:80 member 10.10.1.12:80 member
10.10.1.13:80 }snatpool client_pool { member 10.10.1.100 member 150.10.10.15 } virtual VS_web { destination 150.10.10.10:80 ip protocol tcp snat automap pool web_pool }virtual VS_network{ destination 150.10.1 0.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.1 0.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.10.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool }
- A. 200.10.10.I0D.200.10.10.10
- B. 10.10.1.I10.10.1.1
- C. 150.10.10.15C.150.10.10.15
- D. 10.10.1.I00B.10.10.1.100
Answer: D
NEW QUESTION 21
Which statement concerning virtual servers is true?
- A. Virtual servers cannot perform load balancing without performing address translation.
- B. Virtual servers can reuse connections between the BIG-IP and server for multiple HTTP GETs.
- C. Virtual servers can keep idle server connections open indefinitely.
- D. Virtual servers can compress data between the BIG-IP and servers.
- E. Virtual server processing always translates the virtual server address to the address of the chosen pool member.
Answer: B
NEW QUESTION 22
Which persistence method will always recognize a client when the client returns to the same virtual server?
- A. MSRDP
- B. expression [universal]
- C. source address
- D. No persistence method work in all situations.
- E. SSL
Answer: D
NEW QUESTION 23
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- B. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- C. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
- D. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
- E. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
- F. The request will be dropped.
- G. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- H. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
Answer: B
NEW QUESTION 24
QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- B. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010
- C. Source IP: 10.20.100.50; Destination IP: 10.10.2.10
- D. The request will be dropped.
Answer: B
NEW QUESTION 25
A, steaming profile will do which of the following?
- A. Search and replace all occurrences of a specified string only in request processed by a virtual server.
- B. Search and replace all occurrences of a specified string only is responses processed by a virtual server.
- C. Search and replace all occurrences of a specified string in requests and responses processed by a virtual server.
- D. Search and replace the first occurrence of a specified of a specified string in either a request or response processed by a virtual server.
Answer: C
NEW QUESTION 26
Which is the result when multiple monitors are assigned to a pool member?
- A. The member is marked as available if any of the monitors succeed.
- B. The member is marked as unavailable if any of the monitors fails.
- C. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
- D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).
Answer: C
NEW QUESTION 27
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result
- A. The default load-balancing method would be used.
- B. An error would be displayed since no load-balancing method was specified.
- C. The system would prompt the user for a load-balancing method.
- D. The load-balancing method of the previous pool would be used.
Answer: A
NEW QUESTION 28
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. the value in the tcp acknowledgement field
- B. an IP address
- C. any text string within a cookie
- D. any bytes within the initial client request packet
Answer: B,C
NEW QUESTION 29
How many events can be referenced in a given iRule?
- A. Exactly one.
- B. iRules can have multiple events.
- C. iRules can have up to event if one is client-side and one is server-side.
- D. iRules are limited to one event, but a virtual server could be associated with multiple rules.
Answer: B
NEW QUESTION 30
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.1 61.16 network SNAT Automap configured V VirtualServer2 Destination: 10.10.2.102:* netmask
255.255.255.255 Transparent with 3 pool members
in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.103 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:443. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.201; Destination IP: pool member in the 192.168/16 network G
- B. Source IP: 10.10.2.103; Destination IP: pool member in the 192.168/16 network
- C. Source IP: 10.10.201; Destination IP: 10.102.102
- D. Source IP: 10.10.2.103; Destination IP: 10.10.2.102
- E. The request will be dropped.
- F. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
Answer: D
NEW QUESTION 31
Which tool is used on BIG-IP systems to capture data packets?
- A. tcpdump
- B. ethereal
- C. qkview
- D. snoop
Answer: A
NEW QUESTION 32
......
Certification Path of 301a - LTM Technology Specialist
Acquiring the F5-CTS LTM accreditation requires breezing through two tests â BIG-IP LTM Specialist: Architect, Setup, and Deploy (Exam 301a) and BIG-IP LTM Specialist: Maintain and Troubleshoot (Exam 301b).
301 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.testkingfree.com/F5/301-practice-exam-dumps.html