[Sep-2021] Valid Way To Pass Cisco Exam Dumps with 700-905 Exam Study Guide
All 700-905 Dumps and Cisco HyperFlex for Systems Engineers Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 24
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. "Software only" solutions are inherently more secure, adhering to government regulations.
- B. "Hardware only" solutions require less latency for data aggregation.
- C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
- D. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.
- E. Validated yet "mixed" hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.
- F. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.
Answer: C,D,F
Explanation:
NEW QUESTION 25
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution. - B. "Software only" solutions are inherently more secure, adhering to government regulations.
- C. "Hardware only" solutions require less latency for data aggregation.
- D. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution. - E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution. - F. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement.
Answer: C,E,F
NEW QUESTION 26
A Controller Virtual Machine (CVM) is an Ubuntu Linux VM that lives outside the converged data platform on the housekeeping drive since it is involved in creating the convergence data platform Which two features tor CVMs are valid? (Choose two.)
- A. creates hooks tor services related to third-party abstraction applications
- B. does not perform caching, deduplication: and compression of data
- C. an Ubuntu based VM running in the control space of each individual server, having linear access to the server's VMs and networking controls
- D. needs network access to ESXi. other CVMs, and management network
- E. is installed automatically by the HyperFlex installer, configured through the installer
Answer: D,E
Explanation:
NEW QUESTION 27
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 28
Which three features for NVMe transfer protocol are valid? (Choose three.)
- A. Requires 10 controller
- B. Streamlined commands for fewer CPU instructions
- C. Improves SAS and SATA speed
- D. Increases memory speed for more lOPs
- E. More and deeper queues
- F. Uses PCIe interface
Answer: B,E,F
NEW QUESTION 29
Which Cisco UCS Server running HXDP supports the largest storage pool?
- A. UCS B480
- B. HX220
- C. UCS B200
- D. HX 240
Answer: D
Explanation:
NEW QUESTION 30
Which three advantages of using the M5 generation of HyperFlex servers over the M4 generation are valid? (Choose three )
- A. M.2 SATA drive support for faster disk I/O
- B. Multiple GPUs
- C. DDR3 memory
- D. NVMe support
- E. Support for Cisco VICs
- F. Microsoft Hyper-V support
Answer: A,D,F
Explanation:
NEW QUESTION 31
When local writing or reading is performed, the lOVisor intercepts the read/write requests and forwards them
to CVMs across the cluster This action allows non-local CVMs to be aware of the input/output requests so that
they can perform the appropriate input/output action lOVisor provides which two additional functionalities?
(Choose two.)
- A. provides redundancy when local CVM fails, offloading data processing to another CVM in the cluster
- B. intercepts local virtual machines' reads and writes and distributes them across the network eliminating
hotspots - C. integration point for deployment of cloud-based SaaS offerings from eco-system partners
- D. when an lOVisor fails, the CVM remains active and functional, which enables uninterrupted operation
of the system by forwarding 10 to another available lOVisor In the HyperFlex cluster - E. enables asynchronous replication of data across individual HyperFlex nodes with sub-second
re-convergence
Answer: D,E
NEW QUESTION 32
Which three features do Managed Deployments provide? (Choose three.)
- A. Individual configuration of each redundant fabric or global configuration.
- B. High availability of the management system and connectivity when using 2 Cisco Fabric Interconnects
- C. Decentralized yet complex management of an entire UCS domain.
- D. Consistent deployment by replicating working configurations from development labs to the production deployment
- E. Great tor managing large deployments, scalability, and oversight of the UCS servers.
- F. Increased operating overhead, raising Operating Expenses (OpEx)
Answer: A,B,E
Explanation:
NEW QUESTION 33
How many vCPUs does the HXDP controller VM require?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
NEW QUESTION 34
Which two processes does failure on a node initiate? (Choose two.)
- A. Affected node is marked as unhealthy and placed into standby mode
- B. Distributed pooled data is migrated off nodes to master data store.
- C. The VMs on the failed node are moved to another node by vSphere high availability
- D. A call-home process is initiated and the failure is reported to TAC
- E. The system is marked unhealthy but remains operational.
Answer: C,E
Explanation:
NEW QUESTION 35
When building a HyperFlex cluster which two recommendations should be followed? (Choose two.)
- A. Use HX 220s for compute nodes and HX 240s for converged nodes
- B. Use B-Series servers to improve converged node scale.
- C. Use the same server model for the cluster.
- D. Use the same CPU model but memory configuration can be different.
- E. Use the same server configuration for the cluster.
Answer: C,E
NEW QUESTION 36
Drag and Drop Question
Drag the server type from the left onto the maximum number of capacity drives on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION 37
Which Cisco UCS Server running HXDP supports the largest storage pool?
- A. UCS B480
- B. HX220
- C. UCS B200
- D. HX 240
Answer: D
NEW QUESTION 38
Which three additional management tools are included in HXDP to configure HyperFlex clusters?
(Choose three.)
- A. HyperFlex Connect
- B. Data Center Network Manager
- C. Cisco IMC 13
- D. REST API
- E. UCS Manager
- F. Storage CLI
Answer: A,D,F
Explanation:
NEW QUESTION 39
Which two results are expected when you replace a node or expand a cluster? (Choose two.)
- A. Affected node is marked as unhealthy and placed into standby mode
- B. vSphere DRS migrates the virtual machines to the new node to balance the load
- C. Distributed pooled data is migrated off nodes to master data store.
- D. On node replace, the self-healing must finish for the cluster to be healthy
- E. The cluster profile is updated and RAID takes care of rebalancing the load.
Answer: B,D
Explanation:
NEW QUESTION 40
Drag the server type from the left onto the maximum number of capacity drives on the right.
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel
interfaces on vSphere. - B. Multiple-interface-card virtualization without any additional driver requirements with integration of the
virtualized cards into the Fabric Interconnect infrastructure. - C. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards
based on the server profile (MAC/WWN). - D. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to
individual virtual machines bypassing local hardware requests. - E. Traffic processing for internal and external communication supporting simultaneous HBA and NIC
operation on the same physical hardware. - F. Virtualizing object storage environments by pushing meta data directly to the management server
Answer: B,C,D
NEW QUESTION 41
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 16 nodes
- B. 8 nodes
- C. 64 nodes
- D. 32 nodes
Answer: C
Explanation:
NEW QUESTION 42
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?
- A. in UCS Manager service profiles
- B. in UCS Manager server profiles
- C. in non-volatile memory on the VIC
- D. in VCenter virtual machine image
Answer: C
NEW QUESTION 43
The process of optimizing information is tightly tied to the writing process as it is performed inline as the
writing process is being performed The process of data optimization is performed with which two processes?
(Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
- C. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- D. ACK is sent to the CVM that the write is about to be initiated
- E. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
Answer: D,E
NEW QUESTION 44
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)
- A. Connect port 2 on the VIC to Interconnect B.
- B. Connect server port L1 to Fabric Interconnect port L1.
- C. Connect server port L2 to Fabric Interconnect port L2
- D. Connect the node to different port numbers on each of the two Fabric Interconnects.
- E. Connect port 1 on the VIC to Fabric Interconnect A.
- F. Connect the node to the same port number on each of the two Fabric Interconnects.
Answer: A,E,F
NEW QUESTION 45
HyperFlex is tightly integrated Into the Cisco portfolio, allowing which two powerful service integrations''
(Choose two)
- A. Cloud mobility: CloudCenter enables workload mobility between HyperFlex and public and private
clouds, Including private cloud self-service Infrastructure as a service (laaS) capabilities - B. Multi-cloud integration Workloads are able to seamlessly migrate to platforms such as Amazon Web
Services: Microsoft Azure and Google Cloud Platform - C. Data Center Network Monitor: This management platform enables administrators to monitor storage In
the HyperFlex solution and provide real-time storage performance for the HyperFlex cluster - D. On-premise container platform: Cisco Container Platform automates repetitive tasks, such as installing
Kubernetes and Docker, installing analytics tools, creating
clusters, load balancing, curatmg the OS. and even updating the distribution - E. Application centric infrastructure: ACI enables faster deployment via End-Point Group integration of
the HyperFlex clusters into existing application environments
Answer: A,B
NEW QUESTION 46
......
Get Latest [Sep-2021] Conduct effective penetration tests using TestKingFree 700-905