Master 2022 Latest The Questions Nutanix SE Academy and Pass NCSE-Core Real Exam!
Penetration testers simulate NCSE-Core exam PDF
NEW QUESTION 17
A customer previously purchased a Nutanix solution of nine NX-3060-G7 nodes. The customer asks for help to increase the resiliency of their environment after power outages to individual racks in their datacenter Their current solution consists of two NX-3460-G7 blocks and a single NX-3160-G7 block placed in a single rack. what should the systems engineer recommend to this customer ?
- A. Buy three additional NX-3060 Upgrade nodes and place them into the NX-3160 block Enable Rack Awareness
- B. Move on node from each NX-3460 into the NX-3160 block. Spread the blocks over three racks and enable Rack Awareness
- C. Move on node from each NX=3460 block over to the NX-3160 blocks. Enable Block Awareness
- D. Buy on additional node and place it, into the NX-3160 block. Spread the blocks over three racks. Enable Rack Awareness.
Answer: C
NEW QUESTION 18
74. A VP of Applications at a prospective customer is working to transform IT from a cost, center to a business enabler. In order to address this initiative, the VP has identified the following areas for improvement:
Increased time and expenses related to meeting business deliverables Missed market opportunity due to slow IT response time Shadow IT increases risk of security breaches and brand damage Unplanned spend on public cloud services (AWS) what two key benefits should the SE review to address the customer's challenges?
(Choose two)
- A. Provide a hardened and secured solution that can inherently block Shadow IT.
- B. Provide developers with a native and integrated Self Service Portal that can scale on demand.
- C. Deliver an on-premises solution with an out-of-the-box cloud like experience.
- D. Deliver enhanced performance for resource intensive applications.
Answer: A,B
NEW QUESTION 19
A systems engineer sizers an environment based on the customer's requirement of N+2 resiliency for the entire cluster. In which two ways could the configuration be changed to meet the customer's requirements ? (Choose Two)
- A. Increase the RAM capacity per Node
- B. Increase the SSD capacity per Node
- C. Increase the CPU capacity per Node
- D. Increase the number of Nodes
Answer: A,D
NEW QUESTION 20
Refer to the exhibit.
A prospect provides the data shown captured from their existing environment using RVTools. The prospect has additional historical CPU utilization data that indicates peak CPU utilization never exceeds 50% on either physical host.
Which vCPU:pCore ratio should be used in Sizer?
- A. 5:1
- B. 3:1
- C. 2:1
- D. 4:1
Answer: D
NEW QUESTION 21
When reviewing Nutanix cluster upgrades, a customer engineer is concerned that their VM will be forced to repeatedly migrate between nodes Which Nutanix feature allows VMs to remain on a host during an AOS upgrade?
- A. Data Locality
- B. CVM Autopathing
- C. Shadow Clones
- D. R3
Answer: B
NEW QUESTION 22
A customer has a requirement to run a single instance Oracle Database VM on AHV that is driving over 250,000 IOPs.
Which AOS feature should be positioned to deliver the highest level of performance?
- A. Volume Group Load Balancer
- B. Data Locality
- C. Shadow Clones
- D. App Mobility Fabric
Answer: A
NEW QUESTION 23
A customer intends to build out their VDI environment over a period of 18 months. They require a consistent user experience as their numbers grow. what element of the Nutanix WebScale architecture would a systems engineer discuss with them?
- A. Linear performance with predictable scaling
- B. No single point of failure
- C. Nutanix can run on multiple hardware vendor platforms
- D. All intelligence in software
Answer: A
NEW QUESTION 24
When using Nutanix Sizer, which solution does the Automatic sizing option provide?
- A. The highest performance solution that meets the provided requirements
- B. The lowest cost solution that meets the provided requirements.
- C. A solution that meets provided requirements, plus a default 25% growth capacity
- D. A solution that banlances cost and performance, plus a default 25% growth capacity
Answer: B
NEW QUESTION 25
A prospect uses VMware, Oracle and Microsoft products for their critical operations. The prospect prefers an all-flash array because they have significantly invested in servers for their oracle environment to save on licensing costs.
Which feature should be discussed to address this objection?
- A. ABS
- B. All-flash nodes.
- C. AHV
- D. Hyper-V Support.
Answer: A
NEW QUESTION 26
Refer to Exhibit.
When entering a Raw Input workload into Sizer, what amount of RAM should be used for the entire workload?
- A. 48GB
- B. 32GB
- C. 42GB
- D. 64GB
Answer: B
NEW QUESTION 27
Which CVM service rs responsible for providing storage to the hypervisor?
- A. Curator
- B. Zookeeper
- C. Genesis
- D. Stargate
Answer: D
NEW QUESTION 28
Which two items are considered by Sizer when calculating the required cluster resources with only the Raw input workload type for a multi-VM workload? (Choose two)
- A. Large VM NUMA requirements
- B. The vCPU:pCore ratio applied for specific VMs
- C. The required RAM for the CVM
- D. The vCPU:pCore ratio applied to all VMs
Answer: C,D
NEW QUESTION 29
An SE is performing workload discovery with an SMB prospect running SQL Server. The databases is less than 1 TB, but its performance and uptime are critical to the prospect's business operations. Sizer sugests using
1065S nodes.
Which aspects of the NX-1065S-G5 would cause an SE to filter out that nodel from Sizer's Automatic configuration? (choose two.)
- A. Single Power Supply
- B. 1Gb Networking
- C. Limited to 4 nodes
- D. Single HDD
- E. Single Socket Processor
Answer: B,E
NEW QUESTION 30
A customer has two mission-critical applications and needs to have them backup up to a remote location. The remote location is connection using a leased line and has an average latency of 7 ms. Which Nutanix technology will provide the shortest PRO possible?
- A. Leap
- B. NearSync
- C. AsyncDR
- D. Metro Availability
Answer: C
NEW QUESTION 31
A prospective customer has a requirement for Data-at-Rest-Encryption for all their data Which two license options are available to address this requirement? (Choose two)
- A. Pro with the Encryption SKU
- B. Starter with the Encryption SKU
- C. Pro
- D. Ultimate
Answer: A,C
NEW QUESTION 32
A customer's current AHV cluster for mixed server workloads consists of 7 NX-3060-G6 nodes with intel Skylake processors spread across two blocks. Growing demand for resources requires the customer to order three additional NX-3060-G7 nodes with Intel Cascade Lake processors. Which supported approach allows the customer the most efficient use of their additional resources?
- A. Expand the cluster by fully populating the existing blocks, and adding a new block populated with two nodes
- B. Expand the existing cluster by adding a new block populated with the three additional nodes
- C. Expand the cluster by fully populating the existing blocks with the three additional nodes
- D. Create a new cluster using a new block populated by the three additional nodes.
Answer: B
NEW QUESTION 33
An existing customer wants to upgrade their non-AHV hypervisor to the most recent version. The customer needs confirm that the hypervisor is supported on their AOS version. Where on the Support Portal is this information located?
- A. Compatibility Matrix
- B. Upgrade Paths
- C. EOL, Information
- D. Field Advisories
Answer: A
NEW QUESTION 34
A prospect is replacing a 3-tier virtualization infrastructure made up of several ESXi hosts and a SAN. The prospect recently bought a new 4-socket server to host their SQL server workload which uses the same SAN.
Which feature allows the prospect to continue using their new server
without buying another SAN?
- A. Acropolis Block Services (ABS)
- B. Heterogeneous clusters
- C. Virtual Fiber Channel Controller
- D. Acropolis Container Services(ACS)
Answer: A
NEW QUESTION 35
A customer is evaluating Nutanix to replace their existing 200TB filer. The filer is used to store archived images to achieve maximum storage density, RF2 and Erasure Coding are proposed.
What is the minimum number of nodes required to support the maximum Erasure Coding stripe size of 4/1 (data/parity)?
- A. 5 Nodes
- B. 4 Nodes
- C. 7 Nodes
- D. 6 Nodes
Answer: D
NEW QUESTION 36
Refer to Exhibit.
A systems engineer is creating a configuration in Sizer for a customer that is building an app for use as an eBooks repository the app requires the following two workloads:
1. 50 generic web server VMs, each with 2 vCPUs on a 4:1 vCPU ratio, 8 GB of RAM, and 100GB of storage each
2. A fileserver workload with 80TB of usable storage available, which contains mostly PDF's and pre- compressed data.
Any reduction in performance of the web servers must be avoided. After entering the workload with default options, the Sizer outputs the configuration shown in the exhibit.
Which adjustment does the systems engineer need to make to the scenario to meet the performance requirements?
- A. Switch to manual and change the CPUs of the node configuration to a dual 10 core model
- B. increase the RAM of the web server workload to 10 GB per VM.
- C. Switch to manual sizing and increase the RAM of the node configuration to 384 GB
- D. increase the vCPU:CPU ratio of the Webserver workload to 6:1
Answer: C
NEW QUESTION 37
A customer's database administrator is concerned about restoring data locality for their VMs after they migrate during an AHV upgrade.
which feature that addresses the issue should the systems engineer highlight?
- A. AHV's built-in scheduler automatically restores data locality.
- B. Shadow clones mitigate the need for data locality.
- C. Mirroring the database on two VMs eliminates the need for data locality.
- D. All VM data is moved from the source to the destination node with the VM
Answer: A
NEW QUESTION 38
When creating a multi-cluster scenario in Sizer, what does the Summary Failover Capacity indicator (N +0, N
+1) display?
- A. N+0, if the CPU utilization for all clusters falls below N+ 1 resiliency.
- B. The indicator shows the worst resiliency level of any cluster in the scenario
- C. N+0, if the RAM utilization for all clusters falls below N+1 resiliency.
- D. The indicator shows the best resiliency level of any cluster in the scenario.
Answer: D
NEW QUESTION 39
Refer to the exhibit.
***Exhibit is Missing***
Based on the sizing scenario, what level of resiliency can be inferred about the configuration?
- A. N+0
- B. N+2
- C. N+1
- D. FTT1
Answer: B
NEW QUESTION 40
......
Penetration testers simulate NCSE-Core exam: https://www.testkingfree.com/Nutanix/NCSE-Core-practice-exam-dumps.html
Bestselling On-The-Job Reference Exam Questions: https://drive.google.com/open?id=1d3tfXBjMldjX7jCdhkezxLMC0u_IzJsx