Pass Your VMCE VMCE_V10 Exam on Jan 13, 2022 with 50 Questions
VMCE_V10 Free Exam Study Guide! (Updated 50 Questions)
NEW QUESTION 15
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks: 192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is 172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query.
Which of the following virtual lab types must be configured?
- A. Basic single-host
- B. Advanced single-host
- C. All virtual lab configurations would support that
- D. Advanced multi-host
Answer: B
NEW QUESTION 16
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Aggregated data every five minutes
- B. Data does not exist
- C. Aggregated data every two hours
- D. Raw data every 20 seconds
Answer: C
NEW QUESTION 17
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the monitor client under the data protection view
- B. In the monitor client under the infrastructure view
- C. In the reporter portal in the dashboards tab, VM performance dashboard
- D. In the reporter portal in the workspace tab, VM performance
Answer: A
Explanation:
Reference: https://www.veeam.com/blog/monitoring-vmware-hyperv-environment.html
NEW QUESTION 18
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- B. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
- C. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- D. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
Answer: D
Explanation:
Explanation: Section: (none)
NEW QUESTION 19
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Instant VM Recovery with "secure restore"
- B. Instant VM Recovery with "staged restore"
- C. SureBackup
- D. Virtual disk restore
Answer: A
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100
NEW QUESTION 20
A company wants to leverage Veeam DataLabs to automate the creation of a test environment. As testing one large, multi-VM application could require more than a single host, a dedicated VMware ESXi cluster has been identified. The sandbox is to be refreshed weekly or on demand. Select the benefits of using replication jobs in this environment.
(Choose two.)
- A. Replicas can take advantage of advanced multi-host virtual labs
- B. There is a bigger number of VMs supported for multi-VM application tests when replicas are used
- C. There are additional tests available in DataLabs when replicas are the source
- D. Replication jobs do not stop the sandbox, unlike backup jobs
- E. The VMs are running directly on a high performance datastore, uncompressed
Answer: A,E
NEW QUESTION 21
Exhibit:
Look at the diagram. This daily backup job has been running for over 30 days and no active full backups have been taken since the first run. Which of the following best describes the backup job?
- A. This is a forward incremental backup with Sunday and Wednesday synthetic full, keeping seven restore points
- B. This is a reverse incremental backup, keeping seven restore points
- C. This is forever forward incremental backup, keeping seven restore points
- D. This is a forward incremental backup with transform enabled, keeping four restore points
Answer: B
NEW QUESTION 22
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use backup jobs to back up directly to tape; ship the tapes off site
- B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- C. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 23
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A distributed virtual switch without uplink(s)
- B. A distributed virtual switch with uplink(s)
- C. A standard virtual switch with uplink(s)
- D. A standard virtual switch without uplink(s)
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 24
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
- B. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- C. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- D. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
Answer: A
NEW QUESTION 25
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use on-click failover
- B. Use a failover plan
- C. Use a planned failover
- D. Use Instant VM Recovery
Answer: D
Explanation:
Reference: https://www.veeam.com/virtual-machine-backup-solution-free.html
NEW QUESTION 26
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- B. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. If a VM within the replication job is not mapped, the job will fail
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 27
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Snapshot deletion
- B. Snapshot creation
- C. High CPU usage
- D. Storage snapshot deletion
- E. Storage snapshot creation
- F. Veeam backup activity
Answer: A,B,F
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
NEW QUESTION 28
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. Replication
- B. Backup copy
- C. Backup to tape
- D. File to tape
Answer: A
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION 29
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- B. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
- C. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- D. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100
NEW QUESTION 30
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Reverse incremental with optional periodic synthetic full backups
- B. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- C. Reverse incremental with periodic active full backups
- D. Forward incremental with optional periodic synthetic and/or active full backups
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/forward_incremental_backup.html?ver=
100
NEW QUESTION 31
A backup administrator needs to restore two data drives to a VM where the operating system remains intact. The target machine must remain powered on. What recovery option is most appropriate to perform this operation?
- A. Instant VM Recovery
- B. Restore VM files
- C. Restore entire VM
- D. Instant disk recovery
Answer: A
Explanation:
Explanation: Section: (none)
Explanation
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/instant_recovery.html?ver=100
NEW QUESTION 32
A backup administrator has replicated a virtual machine between two Hyper-V hosts and now would like to automatically verify the recoverability of the replica. What would they need to do?
- A. Create a virtual switch with no uplinks and start the virtual machine connected to the new switch
- B. It is not supported to perform SureBackup replica testing for Hyper-V
- C. Create a virtual lab and an application group; create a SureBackup for the replica job and run it once a day
- D. Start the virtual machine manually using the universal application item recovery wizard
Answer: B
NEW QUESTION 33
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)
- A. The backup copy job creates a single file with multiple restore points included within for archival purposes
- B. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
- C. During the backup copy job process, a VM snapshot is created for consistency
- D. The backup copy job creates a forever forward incremental backup chain
- E. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository
Answer: B,D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/about_backup_copy.html?ver=100
NEW QUESTION 34
A company has outgrown their current data center and plans to use the second data center as the new primary and needs to migrate their workloads. They are running VMware in both data centers. Which steps would allow this migration to occur without any data loss?
- A. 1. Replication job
2.Failback
3.Commit failback - B. 1. Backup job
2.Instant VM Recovery
3.Finalize the Instant VM Recovery - C. 1. Replication job
2.Planned failover
3.Permanent failover - D. 1. Replication job
2.Failover plan
3.Permanent failover
Answer: D
NEW QUESTION 35
......
VMCE_V10 Dumps for VMCE Certified Exam Questions & Answer: https://www.testkingfree.com/Veeam/VMCE_V10-practice-exam-dumps.html