NS0-175 Practice Test Questions Updated 277 Questions
Network Appliance NS0-175 Dumps - Secret To Pass in First Attempt
NetApp NS0-175 Exam Topics:
| Section | Objectives |
|---|---|
| Flexpod Design | - Describe FlexPod components based upon customer workloads - Describe how to size a solution based on customer requirements in accordance with FlexPod best practices - Describe the support options for FlexPod |
| Tools | - Describe resources for determining supported FlexPod components - Demonstrate knowledge of using tools for managing FlexPod - Demonstrate knowledge of troubleshooting methodologies for FlexPod solutions |
| Security | - Describe access control methods for FlexPod solutions - Describe the considerations in building a secure multitenancy design |
| Networking | - Describe Cisco networking components used within FlexPod designs - Demonstrate knowledge of FlexPod networking configurations |
NEW QUESTION 84
How can the Network Appliance field alerts be received?
- A. are available at "now.netapp.com"
- B. replace autosupport
- C. may be received via email
- D. are available at "www.netapp.com"
Answer: A,C
NEW QUESTION 85
You have designed a FlexPod configuration with VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode.
Which two statements are true in this scenario? (Choose two.)
- A. VXLAN is a Layer 2 overlay scheme over a Layer 3 network
- B. VXLAN supports the Spanning Tree Protocol for loop prevention
- C. VXLAN is supported only on Cisco MDS 9000 Series switches
- D. VXLAN segments are independent of the underlying network topology
Answer: A,B
NEW QUESTION 86
What must be done in order to add a user to the appliance database, which two of the following you must enter?
- A. user name
- B. group
- C. access permissions
- D. password
Answer: A,D
NEW QUESTION 87
A customer wants to deploy Cisco Intersight into their FlexPod environment. The customer is using the Cisco Intersight SaaS model.
In this scenario, which two virtual machines are required to support this requirement? (Choose two.)
- A. NetApp Active IQ Unified Manager
- B. Cisco Intersight Virtual Appliance
- C. NetApp Virtual Storage Console
- D. Cisco UCS Fabric Interconnect
Answer: A,B
NEW QUESTION 88
You are designing a FlexPod solution and would like to configure ESXi hosts for SAN boot over FCoE.
Which switch would you use for zoning in this architecture?
- A. Nexus 1010
- B. Nexus 7000
- C. Nexus 9000
- D. Nexus 3000
Answer: B
NEW QUESTION 89
Which three cables are allowed to be used between a NetApp cluster node and a Nexus switch for use with a port channel? (Choose three.)
- A. seven meter OM4 fiber optic cable
- B. five meter OM4 fiber optic cable
- C. five meter passive Twinax cable
- D. seven meter passive Twinax cable
- E. seven meter Active Optical Cable (AOC)
Answer: B,C,E
NEW QUESTION 90
State whether the following statement is true or false. The NOW site holds data maintained by the Network Appliance. This information consists of records and customer product information but this data is only available to authorized users.
- A. True
- B. False
Answer: A
NEW QUESTION 91
All of the following are supported interface types EXCEPT _______.
- A. Gigabit Ethernet, fiber
- B. 10/100 Ethernet
- C. ATM
- D. Gigabit Ethernet, copper
Answer: C
NEW QUESTION 92
Which one of the following object types are not cacheable?
- A. HTTP 200 OK responses
- B. VOD MPEG4 Streams
- C. DNS A records
- D. VOD MMS Streams
Answer: B
NEW QUESTION 93
You are designing a FlexPod Datacenter solution that supports Cisco Application Centric Infrastructure (ACI) with VMware vSphere. The customer wants to boot from SAN with FCoE-based LUNs.
What is the correct deployment topology in this situation?
- A. Connect the storage FCoE target ports to the Nexus 9000 series switch and load the UCS fNIC driver during the installation.
- B. Connect the storage FCoE target ports to the Nexus 5000 series switch and load the UCS fNIC driver during the installation.
- C. Connect the storage FCoE target ports to the Chassis Fabric Extender and load the UCS fNIC driver during the installation.
- D. Connect the storage FCoE target ports to the UCS Fabric Interconnects and load the UCS fNIC driver during the installation.
Answer: D
NEW QUESTION 94
Which two connectivity modes are supported for Cisco UCS C-Series Rack-Mount Server management beginning with UCS Manager 2.2? (Choose two.)
- A. quad-wire management
- B. sideband mode
- C. hard-pinning mode
- D. dual-wire management
Answer: B,D
NEW QUESTION 95
Cisco UCS Manager supports which three remote authentication methods? (Choose three.)
- A. RADIUS
- B. TACACS+
- C. WINS
- D. NetBIOS
- E. LDAP
Answer: A,C,E
NEW QUESTION 96
A customer has a workload that requires an extremely dense deployment of CPU cores. For this workload, they have chosen to deploy servers that use AMD EPYC processors.
Which Cisco UCS server product would you use to satisfy this workload demand?
- A. Cisco UCS B480 M5
- B. Cisco UCS B200 M5
- C. Cisco UCS C240 M5
- D. Cisco UCS C125 M5
Answer: D
NEW QUESTION 97
Which UCS Manager feature will allow you to have a consistent server configuration within the system?
- A. service profile templates
- B. same blade hardware configuration
- C. role-based access control
- D. address pools
Answer: A
NEW QUESTION 98
What are the 1U, rack mountable, Fabric Extenders (FEX) used for in a FlexPod environment?
- A. to allow for the UCS B-Series to be connected to the Fabric Interconnects
- B. to allow for extra UCS Blade Chassis to use the Fabric Interconnects
- C. to allow for the UCS S-Series to be connected to the Fabric Interconnects
- D. to allow for the UCS C-Series to be connected to the Fabric Interconnects
Answer: D
NEW QUESTION 99
To open a Network Appliance support ticket, you must access ____ at the NOW site.
- A. Submit a BURT
- B. Submit a RMA
- C. Submit a Case
- D. Submit a support ticket
Answer: C
NEW QUESTION 100
A(n) _____ VIF combines two physical interfaces into a single virtual interface where traffic is active on both physical interfaces.
- A. aggregate-mode
- B. single-mode
- C. cluster-mode
- D. multi-mode
Answer: D
NEW QUESTION 101
If the auth ftp command is used in a proxy configured environment, the appliance will _____
- A. allow FTP requests and execute the remaining FTP ACLs
- B. authenticate all FTP requests
- C. ignore ACLs for FTP over HTTP
- D. allow FTP requests and bypass the remaining FTP ACLs enable/disable FTP over HTTPS
Answer: B
NEW QUESTION 102
You are working with a customer on a new FlexPod solution. The customer advises you that they want a single point of contact for support issues.
In this scenario, which two support solutions should you offer the customer? (Choose two.)
- A. Cisco Solution Support
- B. Cisco SmartNet Total Care
- C. NetApp Solution Support for FlexPod
- D. NetApp SupportEdge Expert
Answer: B,C
NEW QUESTION 103
You have taken over management of an existing FlexPod system as part of a new job role. You want to find details of existing support and service contracts available for the system.
Which two resources would you use to find this information? (Choose two.)
- A. NetApp Interoperability Matrix Tool
- B. FlexPod.com website
- C. Cisco Device Coverage Checker Tool
- D. NetApp Support website
Answer: A,D
NEW QUESTION 104
......
Network Appliance NS0-175 Exam Dumps [2021] Practice Valid Exam Dumps Question: https://www.testkingfree.com/NetworkAppliance/NS0-175-practice-exam-dumps.html