[Nov-2024] HP HPE2-T37 Dumps – Reduce Your Chance of Failure in HPE2-T37 Exam
To help you achieve your ultimate goal, we suggest the actual HP HPE2-T37 dumps for your Using HPE OneView exam preparation to use as your guideline.
NEW QUESTION # 23
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
- B. Not all of the features will be available for HPE ProLiant G7 systems.
- C. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
Answer: B
NEW QUESTION # 24
Which statement about the volume template is true?
- A. A volume created using this template mil not support snapshots
- B. Users will be able to select storage pool during volume creation
- C. A volume created using this template will not support deduplication
- D. Users will be able to change sharing type and volume capacity
Answer: D
NEW QUESTION # 25
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect Group
- B. Logical Interconnect
- C. Logical Enclosure
- D. Server Profile
Answer: C
NEW QUESTION # 26
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile using IL0 interface for each individual server.
- C. Set a specific workload profile within server profile template and update all profiles.
- D. Set a specific workload profile for all managed servers as an HPE OneView global setting.
Answer: C
NEW QUESTION # 27
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
- A. Boot volumes can be created on demand and defined in the server profile template.
- B. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- C. An existing volume can be replicated automatically when creating a server profile.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Answer: A
NEW QUESTION # 28
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.
- C. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- D. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
Answer: C
NEW QUESTION # 29
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- B. Changes to the server profile were implemented directly on the server profile.
- C. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: B
NEW QUESTION # 30
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. A logical JBOD cannot be created during server profile creation and must be prepared in advance
- B. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
- C. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
- D. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not configured with the required Smart Link parameter.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION # 32
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 33
Refer to the exhibit.
What does selecting the "Permanent" option mean?
- A. To remove data from the logical JBOD, the "erase on delete" option must be selected.
- B. Any write operation to the logical JBOD will be immediately written, bypassing the cache.
- C. Deleting the logical JBOD is possible only from the CLI with Administrator privileges.
- D. The logical JBOD will not be deleted, even when server profile is deleted.
Answer: D
NEW QUESTION # 34
what is required to add a remote frame to the primary management ring?
- A. Remote frame Link Module IPv6 address
- B. Serial number of one of the remote frames
- C. Request code from the primary HPE Composer
- D. UUD of the remote HPE Composer
Answer: D
NEW QUESTION # 35
To increase security, your customer wants to enable Secure Boot for HPE Synergy 480 Gen10 Compute Modules.
Which boot mode option should be configured in a server profile to enable required option?
- A. UEFI optimized
- B. UEFI
- C. EFI
- D. Legacy BIOS
Answer: B
NEW QUESTION # 36
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- B. A Rack Management Controller must be added to HPE OneView.
- C. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
- D. HPE Superdome Flex complex can be added by adding base chassis of this complex.
Answer: B
NEW QUESTION # 37
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- C. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: A
Explanation:
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
NEW QUESTION # 38
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HPE OneView has a built-in HA feature that can be activated with an additional license
- B. HPE OneView availability relies on HA features provoed by the hypervisor
- C. During hpe oneView deployment customer may select configure proprietary HA mode.
- D. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
Answer: B
NEW QUESTION # 39
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. PowerShell Library for HPE OneView allows scripted environment modification.
- D. HPE OneView Global Dashboard allows server profile replication and change management.
Answer: A
NEW QUESTION # 40
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile using IL0 interface for each individual server.
- C. Set a specific workload profile within server profile template and update all profiles.
- D. Set a specific workload profile for all managed servers as an HPE OneView global setting.
Answer: C
NEW QUESTION # 41
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. Firmware on the master modules is too low to support highly available setup.
- B. Some master modules only support a redundant setup.
- C. There are not sufficient frames for highly available setup.
- D. A dedicated license must be added to HPE OneView to enable this feature.
Answer: B
NEW QUESTION # 42
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- B. PowerShell Library for HPE OneView allows scripted environment modification.
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- B. Changes to the server profile were implemented directly on the server profile.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: C
NEW QUESTION # 44
......
100% Free HPE2-T37 Demo-Trial [Pdf], get it now: https://drive.google.com/open?id=19kHpcRMSRX-Vkm8LJIfu7WMlGgMnWvzD
Accurate & Verified Answers As Seen in the Real Exam here: https://www.testkingfree.com/HP/HPE2-T37-practice-exam-dumps.html