Latest [Dec 09, 2021] HPE0-V14 Exam with Accurate Building HPE Hybrid IT Solutions PDF Questions
Take a Leap Forward in Your Career by Earning HP 290 Questions
NEW QUESTION 42
You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?
- A. Perform a hot reset on the second switch after the first switch is activated
- B. Reinitialize the devices attached to the first switch before installing the firmware on the second switch
- C. Perform a hot reset on the first switch to initiate the installation on the second switch
- D. Reactivate the upgrade on the first switch before attempting to update the firmware on the second switch
Answer: A
NEW QUESTION 43
Which hardware and software components make up a Nimble dHCI infrastructure?
- A. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
- B. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
- C. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
- D. Aruba Switches, HPE Synergy, HPE Nimble, and VMware
Answer: B
NEW QUESTION 44
A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?
- A. StoreEver
- B. Storage File Controller
- C. Smart Array Controller
- D. StoreOnce RMC
Answer: B
NEW QUESTION 45
Match each workload profile description with the corresponding profile. (Select all that apply.)
Answer:
Explanation:
Missing Critical - Large number of database operations (Trades Performance reliability) Transactional Application Processing - Trades performance for reliability (Large number of DB Operation) General Peak Frequency Compute - Maximize processor speed
NEW QUESTION 46
A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.
Which action should the customer take first?
- A. Access Smart Storage Administrator to configure additional storage resources
- B. Access the clustering feature in the CMC to configure active/active clustering
- C. Access the SSMC for upgrade advice
- D. Access InfoSight for recommendations
Answer: D
NEW QUESTION 47
A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
* Support for Multi Chassis Link Aggregation in an active-active mode.
* The control plane must not be a single point of failure.
* Rapid Fail-over. Unified Management.
* They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?
- A. HPE Intelligent Resilient Framework (IRF)
- B. Aruba Virtual Switching Extension (VSX)
- C. HPE Distributed Trunking
- D. Aruba Virtual Switching Framework (VSF)
Answer: B
Explanation:
Reference: https://www.arubanetworks.com/assets/tg/AVD_Midsize-Campus-Design-Deploy.pdf
NEW QUESTION 48
Place the components on the left in the correct order on the right for the recommended power-up sequence.
Answer:
Explanation:
1 - SAN switches
2 - Tape libraries
3 - Disk storage
4 - Host servers
NEW QUESTION 49
Match each characteristic to the appropriate RAID level.
Answer:
Explanation:
Explanation
NEW QUESTION 50
Which hardware and software components make up a Nimble dHCI infrastructure?
- A. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
- B. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
- C. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
- D. Aruba Switches, HPE Synergy, HPE Nimble, and VMware
Answer: B
Explanation:
Explanation/Reference: https://community.hpe.com/t5/HPE-Storage-Tech-Insiders/HPE-Nimble-Storage-dHCI-Technical- Overview/ba-p/7054163#.XnxfMW5RWQ4
NEW QUESTION 51
A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?
- A. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches
- B. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches
- C. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches
- D. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches
Answer: A
Explanation:
Needs 4 switches for port count, customer wants minimum of managed devices so one stack, VSX only supports two switches so must be an IRF based stack. As to ShaunSong's comment, 10GBaseT ports also negotiate 1000BaseT so are inherently 1/10Gb capable.
NEW QUESTION 52
What is the process or writing data to two locations within a single array in real time?
- A. data mirroring
- B. business continuity
- C. replication
- D. clustering
Answer: A
NEW QUESTION 53
What should you configure to limit the scope of broadcast domains in an Ethernet network?
- A. VLAN
- B. VSAN
- C. Trunks
- D. Static ARP
Answer: A
NEW QUESTION 54
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?
- A. Smart Storage Hybrid Capacitor
- B. Workload Accelerator
- C. Secondary Riser Kit
- D. SSD Drives
Answer: B
NEW QUESTION 55
A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
* Support for Multi Chassis Link Aggregation in an active-active mode.
* The control plane must not be a single point of failure.
* Rapid Fail-over.
* Unified Management.
* They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?
- A. HPE Intelligent Resilient Framework (IRF)
- B. Aruba Virtual Switching Extension (VSX)
- C. HPE Distributed Trunking
- D. Aruba Virtual Switching Framework (VSF)
Answer: B
Explanation:
Explanation/Reference: https://www.arubanetworks.com/assets/tg/AVD_Midsize-Campus-Design-Deploy.pdf
NEW QUESTION 56
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
Answer:
Explanation:
Explanation
Server model - HPE Proliant DL380 Gen10
Storage model - HPE MSA 2040
NEW QUESTION 57
......
Authentic Best resources for HPE0-V14 Online Practice Exam: https://www.testkingfree.com/HP/HPE0-V14-practice-exam-dumps.html
Practice To HPE0-V14 - TestKingFree Remarkable Practice On your Building HPE Hybrid IT Solutions Exam: https://drive.google.com/open?id=1HrSSCbruBfpDEj4VOXmoUICoK_r37jJo