Guide (New 2021) Actual Network Appliance NS0-303 Exam Questions
NS0-303 Exam Dumps Pass with Updated 2021 Certified Exam Questions
NetApp NS0-303 Exam Topics:
| Section | Objectives |
|---|---|
| Administration | - Demonstrate knowledge how to administer the NetApp hybrid cloud - Describe NetApp supported container solutions - Demonstrate knowledge of NetApp data protection options for hybrid cloud workloads |
| Troubleshooting | - Describe monitoring tools for hybrid cloud - Describe NetApp hybrid cloud solution troubleshooting |
| NetApp Hybrid Cloud Fundamentals | - Identify networking concepts - Identify compute concepts - Identify hybrid cloud storage fundamentals - Describe how to automate configurations - Describe availability concepts |
| Implementation | - Identify how to provision CVO - Identify how to provision CVS or ANF - Identify how to provision a NetApp StorageGRID solution - Identify how to provision NetApp cloud management tools |
| Security | - Describe data security concepts - Identify data compliance concepts |
NetApp NS0-303 Exam Certification Details:
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-303 Sample Questions |
| Exam Name | Hybrid Cloud Administrator |
| Exam Code | NS0-303 NCHCAD |
| Duration | 90 minutes |
| Number of Questions | 60 |
| Recommended Training | Cloud Data Services Fundamentals Cloud Volumes ONTAP Fundamentals OnCommand Insight: Fundamentals StorageGRID Webscale Fundamentals |
| Exam Registration | PEARSON VUE |
| Passing Score | 64% |
NEW QUESTION 12
You are deploying Cloud Volume ONTAP HA configuration in multiple Availability Zones in AWS. You want to ensure high availability of your data if a failure occurs.
Which two steps accomplish this task? (Choose two.)
- A. Use OnCommand Systems Manger.
- B. Place Node1, Node2, and the Mediator in separate Availability Zones.
- C. Place Node1, Node2, and the Mediator in separate regions.
- D. Use OnCommand Cloud Manager.
Answer: B,D
NEW QUESTION 13
You created a volume with Cloud Volumes Service for AWS for an analytics application. The application using the volume requires maximum performance. You have set the service level to "extreme". All the analysis takes place between 9:00 A.m. and 5:00 p.m.
In this scenario, how would you optimize storage cost?
- A. Create a new volume with a lower service level.
- B. Use the API to lower the service level of the volume during off-peak hours.
- C. Reduce the capacity of the volume.
- D. Use the built-in sync service to move the volume to another region with lower cost storage.
Answer: B
NEW QUESTION 14
You are a StorageGRID administrator, and your CIO wants to know what happens when two clients update the same object.
How does StorageGRID manage this situation?
- A. The last client request updates the object.
- B. The last user gets an error message.
- C. The first client request locks the object.
- D. The last anonymous user receives priority.
Answer: A
NEW QUESTION 15
You are deploying a Cloud Volumes ONTAP HA system that uses multiple Availability Zones In AWS. You want to make sure that you can access the floating IP addresses in your Virtual Private Cloud (VPC. from your other VPCs in the same AWS region in which you have deployed your Cloud Volumes ONTAP HA system.
How do you accomplish this task?
- A. Use OnCommand Systems Manager to make floating IP addresses accessible between your VPCs.
- B. Create peering between your VPCs using the AWS console.
- C. Use the AWS Transit Gateway service to create a route to your floating IP addresses.
- D. Use OnCommand Cloud Manager to make floating IP addresses accessible between your VPCs.
Answer: D
NEW QUESTION 16
Click the Exhibit button.
Your Cloud Volumes Service export is mounted on a Red Hat Enterprise Linux instance.
You can view a top-level directory listing, but you cannot create files.
Referring to the exhibit, what is the IP address of your Red Hat Enterprise Linux instance?
- A. 10.0.0.0
- B. 10.0.2.6
- C. 10.0.1.0
- D. 10.0.1.6
Answer: B
NEW QUESTION 17
You need to set permissions to launch OnCommand Cloud Manager in AWS public cloud without using Cloud Central.
In this scenario, to ensure that OnCommand Cloud Manager can launch successfully, which action would accomplish this task?
- A. Grant permissions to the IAM User.
- B. Open a firewall rule for port 443 to my.netapp.com.
- C. Grant permissions to the account Admin User.
- D. Grant permissions to the OnCommand Cloud Manager instance.
Answer: A
NEW QUESTION 18
You have an AFF A800 and are tiering data into StorageGRID. You need to keep a second copy of the cold data in an S3 bucket within AWS.
In this scenario, which two NetApp technologies would you use? (Choose two.)
- A. FlashPool
- B. SnapMirror
- C. Cloud Sync
- D. CloudMirror
Answer: B,D
NEW QUESTION 19
You want to create your first volume that uses Cloud Volumes Service for AWS.
Which three requirements must your AWS environment have in this scenario? (Choose three.)
- A. the mapped SMB shares from the compute engine
- B. an AWS Virtual Private Cloud (VPC)
- C. the Virtual Private Gateway (VGW) that is connected to your Virtual Private Cloud (VPC)
- D. the defined routes that include the network on which the cloud volumes run
- E. a Cloud Sync data broker
Answer: A,B,C
NEW QUESTION 20
Your environment that is monitored by Cloud Insights is growing rapidly and requires the deployment of additional Data Collectors. You want to deploy preconfigured collectors.
In this scenario, what allows you to accomplish this task?
- A. Data Collector PowerShell script
- B. Data Collector Federation
- C. Data Collector bulk import
- D. Data Collector cloning
Answer: C
NEW QUESTION 21
You have deployed Cloud Volumes ONTAP into your Azure vNet. However you are unable to access the instance from your on-premises workstation. You verify that the provisioned Network Security Group on the instance is configured to allow access from 0.0.0.0/0.
In this scenario, what would be three reasons for this problem? (Choose three.)
- A. There are routing restrictions to the Azure vNet.
- B. There is no connectivity to the Azure vNet.
- C. There is a Network Security Group on the gateway.
- D. There is a restricted Network Security Group on the subnet.
- E. There is a restricted Network Security Group on Cloud Manager.
Answer: A,D,E
NEW QUESTION 22
Click the Exhibit button.
You are troubleshooting a failed SnapMirror relationship between two Cloud Volumes ONTAP instances. The source is Azure, and the destination is AWS.
Referring to the exhibit, which connection endpoints need to be verified?
- A. OnCommand Cloud Manager and AWS VPC
- B. AWS VPC and Azure VNet
- C. OnCommand Cloud Manager and Azure VNet
- D. AWS VPC and on-premises network
Answer: C
NEW QUESTION 23
You have designed and written applications as containers and want to deploy them on a Kubernetes cluster. You want to use Cloud Volumes ONTAP to provide dynamic persistent storage for your Kubernetes cluster.
In this scenario, what will automate this task?
- A. kubectl
- B. Terraform
- C. Istio
- D. Trident
Answer: D
NEW QUESTION 24
Click the Exhibit button.
You are the administrator of Azure NetApp Files. You want to secure the NFS mount for your volume so that only the database server 10.10.8.14 can mount the volume.
Referring to the exhibit, to secure the volume, which two steps must you perform in the export policy? (Choose two.)
- A. Delete index 1.
- B. Add a new index for 0.0.0.0/0 Read Only.
- C. Modify Index 1 from Read & Write to No Access.
- D. Add a new Index for 10.10.8.14/32 Read & Write.
Answer: A,B
NEW QUESTION 25
An application developer asks you for a new Cloud Volumes Service volume for AWS that supports SMB and NFS access for development and testing purposes.
In this scenario, what should you do to support the developer's request?
- A. Provision a new Cloud Volumes Service NFS volume, and select the SMB option.
- B. Provision two volumes, one for SMB and one for NFS.
- C. Provision a new Cloud Volumes Service volume as Dual-protocol.
- D. Provision a new Cloud Volumes Service SMB volume, and select the NFS option.
Answer: C
NEW QUESTION 26
Click the Exhibit button.
You have implemented NetApp Data Availability Services (NDAS) as shown In the exhibit.
In this scenario, which two actions occur with the data copies? (Choose two.)
- A. A Linux proxy copies data from ONTAP to AWS.
- B. Data is copied to the cloud using Intercluster LIFs.
- C. Data Is rehydrated when copying to S3.
- D. Storage efficiency is maintained for all replication.
Answer: A,B
NEW QUESTION 27
You want to remove deduplication from a volume on Cloud Volumes ONTAP by using the volume efficiency off command.
In this situation, which three statements are true? (Choose three.)
- A. By turning off deduplication, you also turn off both inline and post process compression.
- B. You cannot stop post process deduplication and continue using post process compression.
- C. When removing deduplication, the duplicate blocks in the volume are automatically deleted.
- D. You can remove only the deduplication savings and not the compression savings.
- E. Deduplication cannot be restarted on that volume within 24 hours to allow all background scanners to complete.
Answer: B,C,E
NEW QUESTION 28
......
Pass Guaranteed Quiz 2021 Realistic Verified Free Network Appliance: https://www.testkingfree.com/NetworkAppliance/NS0-303-practice-exam-dumps.html
NS0-303 Exam Questions - Real & Updated Questions PDF: https://drive.google.com/open?id=1hf2oJ3R870LH0BeB0C6-YsIdIbApIMtH