[Feb-2024] Use Real OmniStudio-Developer Dumps Free Sample Questions and Practice Test Engine
Pass Salesforce OmniStudio-Developer exam - questions - convert Tets Engine to PDF
NEW QUESTION # 35
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is not selected in the properties of the Type Ahead Block.
- B. Lookup Mode is not selected in the properties of the Type A Head Block.
- C. The Typeghead ley is not in the correct format
- D. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
Answer: D
NEW QUESTION # 36
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
- A. To %%Details:Customer|n:ID%
- B. To $Details:Customer|0:ID$
- C. To %%Details:Customer|1:ID%
- D. To %%Details:Customer|0:ID%%
Answer: C
NEW QUESTION # 37
A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard's records In a Datable How should the developer configure the parent FlexCard's Node?
- A. {Records{0}}
- B. {Recorded}
- C. {Params, records}
- D. {Records}
Answer: D
NEW QUESTION # 38
What OmniScript Element only displays a rich-text HTML formatted code block?
- A. Text
- B. Edit Block
- C. Text Area
- D. Text Block
Answer: D
NEW QUESTION # 39
The OmniScript must retrieve device details stored in the Assetobject and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?
- A. Navigation Action
- B. SOQL Action
- C. REST API Action
- D. HTTP Action
- E. DataRaptor Extract Action
Answer: D,E
Explanation:
Explanation
According to the OmniScript Action Elements page, a DataRaptor Extract Action can be used to "get data from one or more Salesforce records" and an HTTP Action can be used to "get, save, or delete data through a web application programming interface (API)".
NEW QUESTION # 40
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?
- A. Invoke Mode Fire and Forget
- B. Toast Completion
- C. Use Future
- D. Invoke Mode Non-Blocking
Answer: A
Explanation:
Explanation
The Invoke Mode Fire and Forget feature enables the OmniScript to invoke the Integration Procedure without waiting for a response. This is useful when the response is not needed for the user to proceed
NEW QUESTION # 41
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
- B. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
- C. There is no active version of the OmniScript.
- D. There is no active version of the DataRaptor Extract.
Answer: A,B
NEW QUESTION # 42
An integration Procedure uses an HTTP action to makea REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?
- A. Use aRemote Action that calls the XMLStreamReader class
- B. Use a DataRaptor Transform to convert JSON to XML
- C. Use a Remote Action that calls the XMLStreamWriter class
- D. Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.
Answer: B
Explanation:
Explanation
According to the OmniStudio Developer Guide, "DataRaptor Transform actions can convert JSON to XML and vice versa." Therefore, the correct answer is C.
NEW QUESTION # 43
Which two of these options can a developer use to retrieve data from a Salesforce object?
Choose 2 answers
- A. A DataRaptor Load Action
- B. A Lookup Input Element
- C. A DataRaptor Extract Action
- D. A DataRapt or Post Action
Answer: C,D
NEW QUESTION # 44
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Records.postalcode}
- B. {Postalcode}
- C. {Params.postalcode}
- D. {Parent.postalcode}
Answer: D
NEW QUESTION # 45
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure aDATA Raptortransform to achievethe expectedOutput JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and theOutput JSONPath as Contact.
- B. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
- C. Set the Input JSON Path as Contact the out JSON Path asContactandtheoutput Data type as List.
- D. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
Answer: C,D
Explanation:
Explanation
A DataRaptor Transform can be used to transform data from one format to another, such as JSON, XML, or CSV. The developer can specify the input and output paths for each field in the Transform tab. The developer can also use formulas to manipulate data in the Formula tab1. To transform contact data into a JSON array, the developer can use either of these methods:
Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab. This will create a list of contact objects from the input JSON and output it as a JSON array.
Set the Input JSON Path as Contact, the Output JSON Path as Contact, and the Output Data Type as List. This will output each contact object as an element of a JSON array.
NEW QUESTION # 46
In an OmniScript, what is unique about a Requirement in a Messaging element? Choose 2 answers
- A. It is only availability for the false message
- B. It makes the banner yellow
- C. It sets the element to required
- D. It requires a Validate Expression
Answer: B,D
NEW QUESTION # 47
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve the expected Output JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.
- B. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
- C. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
- D. Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.
Answer: A,D
NEW QUESTION # 48
Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
NEW QUESTION # 49
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. There are no test parameters configured.
- B. The field is null 0 the Salesforce record.
- C. The fields have exceeded the maximum number allowed on the card.
- D. {recordld} us misspelled in the Data Source Input Map.
Answer: C
NEW QUESTION # 50
A developer needs tocreateDataRaptor to retrieve the name of an account for a contact.
Following best practices, how should a developer configure the extraction steps?
- A. Define extraction steps for the Contact and the Account objects, and set the Extract JSON Path to Contact Account.Name
- B. Define extraction steps for the Contact and the Account objects, and set the Extract 3SON Path to Account.Name
- C. Define an extraction step for the Contact object and set the Extract JSON Path to Contact Account.Name
- D. Define an extractionstep for the Account object, and set the Extract JSON Path to AccountContact.Name
Answer: C
Explanation:
Explanation
A DataRaptor Extract can retrieve data from multiple objects using extraction steps and JSON paths.
However, if the data is from a single object, only one extraction step is needed. The Extract JSON Path can use dot notation to access related fields from that object, such as Contact.Account.Name.
NEW QUESTION # 51
What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?
- A. Go to the Lightning Console and reload the page to test.
- B. Add a key/value pair in the DataRaptor to test it.
- C. Deactivate the card and layout, and go to the PREVIEW tab for the card to test.
- D. Go to the PREVIEW tab In OmniScript to test.
Answer: B
NEW QUESTION # 52
Why woulda developerclone an Integration Procedure instead of versioning it?
- A. The new Integration Procedure will be used independently
- B. The new Integration Procedure it replacing stub data.
- C. The new Integration Procedure is Chainable.
- D. The new Integration Procedure uses a Cache Block.
Answer: A
Explanation:
Explanation
Cloning an Integration Procedure creates a copy of it that can be modified and used independently from the original one. This is useful when the new Integration Procedure has a different purpose or functionality than the original one
NEW QUESTION # 53
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 12.99,13.99
- B. 13.99
- C. Null
- D. 12.99
Answer: B
Explanation:
Explanation
According to the Calculation Matrix Overview page, a Calculation Matrix is "a lookup table that takes an input and returns an output". In this case, the input is the ProductCode and the output is the Price. The exhibit shows a Calculation Matrix with four rows, each with a different ProductCode and Price. The input given is ProductCode: HRA3320, which matches the second row of the matrix. Therefore, the output is Price: 13.99, which is the value in the same row.
NEW QUESTION # 54
Which Calculation Matrix Version in the list would execute on2/15/2020 at 12:00 PM?
- A. Version Number 4
- B. Version Number 2
- C. Version Number 3
- D. Version Number 1
Answer: A
NEW QUESTION # 55
......
Salesforce OmniStudio-Developer exam is intended for professionals who work with the Salesforce platform and have experience working with OmniStudio. Salesforce Certified OmniStudio Developer certification is ideal for developers, architects, and consultants who specialize in Salesforce integration, data migration, and application development. OmniStudio-Developer exam is designed to test a range of skills, including data modeling and management, user interface design, and Apex programming.
Pass Your OmniStudio-Developer Exam Easily - Real OmniStudio-Developer Practice Dump Updated Feb 20, 2024: https://www.testkingfree.com/Salesforce/OmniStudio-Developer-practice-exam-dumps.html
2024 Realistic Verified Free Salesforce OmniStudio-Developer Exam Questions: https://drive.google.com/open?id=1JNF2kNEKAWYhacNtT4Dn61ba9-wUEwI1