[Dec 05, 2024] Fully Updated Free Actual Cisco 300-435 Exam Questions
Free 300-435 Questions for Cisco 300-435 Exam [Dec-2024]
Cisco 300-435 certification exam consists of 60-70 questions and has a duration of 90 minutes. 300-435 exam can be taken in-person at an authorized testing center or virtually through online proctoring. The passing score of this certification exam is 825 out of 1000 points. Automating and Programming Cisco Enterprise Solutions certification is valid for three years, after which the candidate must renew the certification by taking a recertification exam or meeting specific continuing education requirements.
NEW QUESTION # 12 
Refer to the exhibit. How many YANG models does the NETCONF <get> operation interact with?
- A. four
- B. one
- C. two
- D. three
Answer: B
Explanation:
Section: Automate APIs and Protocols
Explanation:
The get operation tag is at the beginning of the document. It interacted only with NTP and its related services.
There get operation interacted only with one model.
NEW QUESTION # 13
Which Cisco feature can be run on a Cisco router that terminates a WAN connection, to gather and provide WAN circuit information that helps switchover to dynamically back up the WAN circuit?
- A. Cisco Express Forwarding
- B. IP SLA
- C. traffic shaping
- D. passive interface
Answer: B
NEW QUESTION # 14
A network administrator must troubleshoot a network issue using Cisco DNA Center. Which API request helps to determine issue details, impacted hosts, or suggested actions for the resolution?
- A. /dna/intent/api/v1/issues
- B. /dna/intent/v1/issues
- C. /dna/api/v1/client-health/issues
- D. /dna/intent/v1/issue-enrichment-details
Answer: D
NEW QUESTION # 15
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: C
Explanation:
Explanation
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION # 16
Which protocol should be run on the LAN side of two edge routers (that are terminating primary and backup WAN circuits) to provide quick failover in case of primary WAN circuit failure?
- A. STP
- B. VRRP
- C. VTP
- D. RIP
Answer: B
NEW QUESTION # 17
What does the command boot ipxe forever switch 1 perform when executed on a Cisco IOS XE device?
- A. It continuously sends DHCP requests for iPXE until the device boots with an image.
- B. It continuously sends DNS requests for iPXE until the device restarts.
- C. It continuously sends DHCP requests for iPXE until the device restarts.
- D. It continuously sends DNS requests for iPXE until the device boots with an image.
Answer: A
Explanation:
The command boot ipxe forever switch 1 configures a Cisco IOS XE device to persistently attempt to boot using iPXE via DHCP until it successfully loads an image. References: (Automating Cisco Enterprise Solutions Official Cert Guide)
NEW QUESTION # 18
What is a benefit of developing an application in a Python virtual environment?
- A. The application operates in multiple target systems simultaneously.
- B. The development environment is isolated from Python projects that already exist.
- C. The application operates across systems that have different operating systems.
- D. The application supports concurrency or multithreading.
Answer: D
NEW QUESTION # 19
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. A portion of the response is shown in the exhibit.
Which module name corresponds to the YANG model referenced in the request?
- A. ietf-interfaces:ietf-ipv4
- B. ietf-interfaces:interfaces
- C. iana-if-type:ethernetCsmacd
- D. ietf-interfaces
Answer: A
NEW QUESTION # 20 
Refer to the exhibit. Cisco SD-WAN deployment must be troubleshooted using vManage APIs. A call to vEdge Hardware Health API returns the data in the exhibit (only a portion is shown). If this JSON is converted to a Python dictionary and assigned to the variable "d", how the status is accessed that is indicated on line 16?
- A. d[data][0][statusList][0][status]
- B. d['data']['statusList']['status']
- C. d['data'][0]['statusList'][0]['status']
- D. d{'data'}[0]{'statusList'}[0]{'status'}
Answer: B
Explanation:
Section: Cisco SD-WAN
Explanation:
The 0s in option AC and D are not logical in this scenario. The status tag already takes care of the error message.
NEW QUESTION # 21
Which two Cisco DNA center features are needs to add legancy on the platform? (Choose two.)
- A. Multivendor SDK support
- B. Trusted device profile update
- C. Device profile replication
- D. Device package download
- E. Device package creation
Answer: A,D
NEW QUESTION # 22
Which two API calls are used to trigger a device configuration sync in Cisco DNA Center? (Choose two.)
- A. PUT /dna/intent/api/v1/network-device
- B. PUT /dna/intent/api/v1/network-device/sync-all
- C. POST /dna/intent/api/v1/network-device/{networkDeviceId}/sync
- D. PUT /dna/intent/api/v1/network-device/{networkDeviceId}/sync
- E. PUT /dna/intent/api/v1/network-device/sync
Answer: C,D
NEW QUESTION # 23
Refer to the exhibit.
Which NETCONF protocol operation is used to interact with the YANG model?
- A. <copy-config>
- B. <get-config>
- C. <get>
- D. <edit-config>
Answer: C
NEW QUESTION # 24
Drag and drop the code from the bottom onto the box where the code is missing in the Ansible playbook to apply the configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 25
Which URI with the request body of Request body:
{"name":"Test","organizationId":<org_id>,"type":"appliance"} creates a new Meraki network called "Test", when using APIs?
- A. PUT https://api.meraki.com/api/v0/organizations/<org_id>/networks
- B. POST https://api.meraki.com/api/v0/networks
- C. POST https://api.meraki.com/api/v0/organizations/<org_id>/networks/<net_id>
- D. POST https://api.meraki.com/api/v0/organizations/<org_id>/networks
Answer: D
Explanation:
To create a new network called "Test" using the Meraki API, the correct URI is the one that uses the POST method to the endpoint that includes the organization ID but not a specific network ID. Therefore, option D is the correct answer. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )
NEW QUESTION # 26
What is a capability of MV Sense MQTT API?
- A. automate the configuration of networking devices
- B. create email alerts for user that violate the security configuration
- C. monitor the network and auto adjust for optimal performance
- D. request and subscribe to historical, current, or real-time data
Answer: D
NEW QUESTION # 27
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. json
- B. yang +json
- C. yang.data+json
- D. yang-data+json
Answer: D
Explanation:
In RESTCONF API calls, when specifying the content type in HTTP headers for requests or responses involving YANG-modeled data, 'yang-data+json' is used as part of the 'Accept' or 'Content-Type' headers to indicate that the message body contains JSON-encoded YANG-modeled data.
In this Python script using RESTCONF, 'yang-data+json' completes the highlighted areas because it specifies that JSON format is expected in response which conforms with YANG data modeling standards.
References: Automating Cisco Enterprise Solutions Official Cert Guide
NEW QUESTION # 28
Drag and drop the characteristics from the left onto the network types on the right.
Answer:
Explanation:
Explanation:
Graphical user interface, application Description automatically generated
NEW QUESTION # 29
Which URI removes an administrator from a Meraki network using an API call?
- A. PUT https://api/meraki.com/api/v0/organizations/<org_id>/admins/?delete=<admin_id>
- B. DELETE https://api/meraki.com/api/v0/organizations/<org_id>/admins/<admin_id>
- C. DELETE https://api/meraki.com/api/v0/organizations/<org_id>/admins/<user>
- D. DELETE https://api/meraki.com/api/v0/admins/<admin_id>
Answer: B
Explanation:
NOTE: The options are fundamentally wrong. The answer is correct. It should be api.meraki.com/api/v0/ organizations/ Reference:
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API (see delete an administrator)
NEW QUESTION # 30
Fill in the blank to complete the statement.
___________________ is a solution for automating the configuration of a device when it is first powered on, using DHCP and TFTP.
Answer:
Explanation:
Zero-touch provisioning
NEW QUESTION # 31
What are two characteristics of REST API calls? (Choose two.)
- A. Parameters passed in the headers
- B. Implemented over http
- C. Unencrypted
- D. Stateless
- E. Non-cacheable
Answer: B,D
Explanation:
REST API calls are characterized as being stateless and implemented over HTTP. Being stateless means that each request from client to server must contain all of the information needed to understand and complete the request; there is no session state stored on the server. Implemented over HTTP indicates that REST APIs use standard web protocols for communication. References: Automating Cisco Enterprise Solutions Official Cert Guide
NEW QUESTION # 32
In which two use cases should a Python virtual environment be used? (choose two.)
- A. When developing multiple Python projects in the same environment that have the same Python package version requirements.
- B. When creating a new project that has a clean development environment in a multi-project development system.
- C. When developing multiple Python projects in the same environment that have conflicting Python package versions.
- D. When developing the same Python application across multiple systems using the same application requirements.
- E. When creating a new project with several development environments in a multi-project development system across the infrastructure.
Answer: B,C
Explanation:
Python virtual environments should be used in cases where there are conflicting Python package versions across multiple projects (Option B) to ensure each project can have its own set of dependencies. Additionally, they are beneficial when starting a new project that requires a clean development environment (Option E), as it allows for a controlled setup without interference from other projects' dependencies. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )
NEW QUESTION # 33
......
Validate your 300-435 Exam Preparation with 300-435 Practice Test: https://www.testkingfree.com/Cisco/300-435-practice-exam-dumps.html
Get all the Information About Cisco 300-435 Exam 2024 Practice Test Questions: https://drive.google.com/open?id=1aqXFRFjywQrHmn3FQHmdfz0teygiPgfQ