[Aug-2023] Updated and Accurate 156-835 Questions & Answers for passing the exam Quickly
Download Real 156-835 Exam Dumps for candidates. 100% Free Dump Files
The Check Point Certified Maestro Expert certification is an essential certification for IT professionals who wish to advance their careers in network security and management. Check Point Certified Maestro Expert certification not only enhances the candidate's skills and knowledge but also validates their expertise in network security and Maestro technology. It is a globally recognized certification that opens up opportunities for IT professionals to work in various roles such as network security engineer, network administrator, security analyst, and security consultant.
NEW QUESTION # 39
How many power supplies are presented on MHO-140?
- A. 0
- B. 1 with option for 2
- C. 1
- D. 2
Answer: A
NEW QUESTION # 40
What kinds of transceivers are supported on Orchestrator MHO-140?
- A. SFP, SFP+, SFP28
- B. SFP+, SFP28, QSFP
- C. SFP, SFP+, QSFP, QSFP28
- D. SFP, QSFP, QSFP28
Answer: C
NEW QUESTION # 41
What is the default range of physical ports for downlinks on Orchestrator MHO-170?
- A. 3 - 16
- B. 25 - 32
- C. 17 - 31
- D. 1 - 16
Answer: C
NEW QUESTION # 42
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Any pair of available ports
- B. Port 1 in Slot 1 and Port 2 in Slot 1
- C. Port 1 in Slot 1 and Port 1 in Slot 2
- D. Port 1 in Slot 2 and Port 2 in Slot 1
Answer: C
NEW QUESTION # 43
For a VSX configuration - Which statement is wrong?
- A. All Virtual Systems exist on all Appliances
- B. VSX configuration is the same on all Appliances within the same Security Group
- C. Each Appliance owns different Virtual Systems
- D. All Virtual Systems exist on the SMO
Answer: D
NEW QUESTION # 44
What is the default Distribution mode?
- A. User
- B. Manual-General
- C. Auto-topology
- D. Network
Answer: C
Explanation:
In Check Point firewall, the default Distribution mode is Auto-topology. Auto-topology uses the built-in algorithm to automatically determine the best way to distribute the traffic across the firewall cluster, based on the topology of the network and the current load on the cluster members.
Auto-topology takes into account the available bandwidth and the CPU utilization of each cluster member, and then makes decisions on how to distribute the traffic across the cluster in real-time. It is a dynamic and adaptive mode that ensures the best use of the available resources and the highest level of performance.
NEW QUESTION # 45
What kind of cluster Dual-Site can be compared to?
- A. Active-Standby only
- B. Active-Standby or VSLS
- C. Active-Active
- D. VSLS only
Answer: C
NEW QUESTION # 46
What kinds of transceivers are supported on Orchestrator MHO-170?
- A. SFP+, SFP28. QSFP
- B. SFP. QSFP, QSFP28
- C. SFP. SFP+. SFP28
- D. QSFP. QSFP28
Answer: D
NEW QUESTION # 47
What is the Iterator process?
- A. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- D. Iterator is the process that simulates distribution in case of Appliance failure
Answer: A
Explanation:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.
NEW QUESTION # 48
Complete the sentence: Orchestrators works as...
- A. Active-Active cluster
- B. Active-Standby cluster
- C. Load Sharing cluster
- D. Hot-Swap RAID
Answer: A
NEW QUESTION # 49
What is a downlink interface used for?
- A. To connect in between Orchestrators
- B. To connect Orchestrators to customer's infrastructure
- C. To connect appliances to Orchestrators
- D. To connect appliances to customer's infrastructure
Answer: C
NEW QUESTION # 50
What is the throughput penalty of Security Group?
- A. Depends on the type of Appliance
- B. 5% per member
- C. 1% per member
- D. 10% per Security Group with no relation to amount of members
Answer: A
NEW QUESTION # 51
For a VSX configuration - Which statement is wrong?
- A. VSX configuration is the same on all Appliances within the same Security Group
- B. Each Appliance owns different Virtual Systems
- C. All Virtual Systems exist on the SMO
- D. All Virtual Systems exist on all Appliances
Answer: D
NEW QUESTION # 52
What is the maximum amount of Appliances within Security group in Dual-Site configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 53
Which command will be used in order to restart Orchestrator service only?
- A. service orchestrator restart
- B. cpstop; cpstart
- C. orchd restart
- D. reboot
Answer: A
NEW QUESTION # 54
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Any pair of available ports
- B. Port 1 in Slot 1 and Port 1 in Slot 2
- C. Port 1 in Slot 1 and Port 2 in Slot 1
- D. Port 1 in Slot 2 and Port 2 in Slot 1
Answer: C
NEW QUESTION # 55
What is an uplink interface used for?
- A. To connect in between Orchestrators
- B. To connect in between appliances
- C. To connect Orchestrators to customer's infrastructure
- D. To connect appliances to customer's infrastructure
Answer: D
NEW QUESTION # 56
What is the default IP range of Sync network (with no increment)?
- A. 192.168.1.0
- B. 198.51.100.0
- C. The same as Management network
- D. 192.0.2.0
Answer: D
NEW QUESTION # 57
......
CheckPoint 156-835, also known as the Check Point Certified Maestro Expert certification exam, is designed for IT professionals who specialize in network security and administration. 156-835 exam validates the candidate's expertise in managing complex and large-scale security networks using the Check Point Maestro solution. 156-835 exam covers a range of topics, including designing and deploying high-performance security networks, managing and troubleshooting network issues, and configuring advanced security features.
CheckPoint 156-835 certification exam is designed for professionals who want to prove their expertise in using Check Point Maestro technology. Check Point Maestro is a powerful network solution that allows organizations to manage their security infrastructure on a massive scale. Check Point Certified Maestro Expert certification exam tests the knowledge and skills of candidates in areas such as Maestro orchestration, security management, and troubleshooting.
Prepare Important Exam with 156-835 Exam Dumps: https://www.testkingfree.com/CheckPoint/156-835-practice-exam-dumps.html
Pass Exam Questions Efficiently With 156-835 Questions: https://drive.google.com/open?id=1dnAsDYBS6-2wUTINrUdLCXhkT7h_HI3A