[2023] Pass RedHat EX200 Premium Files Test Engine pdf - Free Dumps Collection
New 2023 Realistic EX200 Dumps Test Engine Exam Questions in here
RedHat EX200, also known as the Red Hat Certified System Administrator (RHCSA) exam, is a certification exam that is designed to test the knowledge and skills of individuals who want to become certified Red Hat System Administrators. EX200 exam is a performance-based test that evaluates the candidate's ability to perform various tasks and manage Red Hat Enterprise Linux systems.
NEW QUESTION # 54
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1
Answer:
Explanation:
see explanation below.
Explanation
/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.
NEW QUESTION # 55
Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat
Answer:
Explanation:
see explanation below.
Explanation
# useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NEW QUESTION # 56
What does the command packer validate template.jsondo?
- A. The command verifies that the file template.jsonis a syntactically correct and complete Packer
template. - B. The command verifies that all existing artifacts generated by template.jsonhave their original
checksums. - C. The command verifies that images generated previously by template.jsonstill use the most recent
source images. - D. The command verifies that the latest build of the template can be run without downloading additional
images or artifacts. - E. The command verifies that all source images referenced in template.jsonare available and have valid
cryptographic signatures.
Answer: A
Explanation:
Explanation/Reference:
Reference https://www.packer.io/docs/commands/validate.html
NEW QUESTION # 57
SIMULATION
Open kmcrl value of 5 , and can verify in /proc/ cmdline
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
# vim /boot/grub/grub.conf
kernel/vmlinuz-2.6.32-71.el6.x86_64 ro root=/dev/mapper/GLSvg-GLSrootrd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswaprd_NO_LUKSrd_NO_MDrd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet kmcrl=5 Restart to take effect and verification:
# cat /proc/cmdline
ro root=/dev/mapper/GLSvg-GLSroot rd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet kmcrl=5
NEW QUESTION # 58
Configure a task: plan to run echo hello command at 14:23 every day.
Answer:
Explanation:
# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)
NEW QUESTION # 59
CORRECT TEXT
Configure the system synchronous as 172.24.40.10.
Answer:
Explanation:
Graphical Interfaces:
System-->Administration-->Date & Time
OR
# system-config-date
NEW QUESTION # 60
Create a volume group, and set the size is 500M, the size of single PE is 16M. Create logical volume named lv0 in this volume group, set size is 20 PE, make it as ext3 file system, and mounted automatically under data.
Answer:
Explanation:
fdisk /dev/vda
pvcreate /dev/vda3
vgcreate -s 16M vg0 /dev/vda3
lvcreate -n lv0 -l 20 vg0
mkfs.ext3 /dev/mapper/vg0-lv0
mkdir /data
/etc/fstab:
/dev/mapper/vg0-lv0 /data ext3 defaults 0 0
mount -a
mount | grep data
NEW QUESTION # 61
Part 2 (on Node2 Server)
Task 4 [Managing Logical Volumes]
Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz (Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
└─vdb1 252:17 0 4.2G 0 part
└─vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
└─vdc1 252:33 0 4.4G 0 part
└─datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvrz vgrz -wi-ao---- 4.10g
[root@node2 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vgrz 1 1 0 wz--n- <4.15g 48.00m
[root@node2 ~]# parted /dev/vdb print
Number Start End Size Type File system Flags
1 1049kB 4456MB 4455MB primary lvm
* [root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.0G 17M 3.8G 1% /datarz
[root@node2 ~]# parted /dev/vdb mkpart primary 4456MiB 5100MiB
[root@node2 ~]# parted /dev/vdb set 2 lvm on
[root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdb2
Physical volume "/dev/vdb2" successfully created.
* [root@node2 ~]# vgextend vgrz /dev/vdb2
Volume group "vgrz" successfully extended
[root@node2 ~]# lvextend -r -L 4600M /dev/vgrz/lvrz
Size of logical volume vgrz/lvrz changed from 4.10 GiB (1050 extents) to 4.49 GiB (1150 extents).
Logical volume vgrz/lvrz successfully resized.
[root@node2 ~]# resize2fs /dev/vgrz/lvrz
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.4G 17M 4.2G 1% /datarz
NEW QUESTION # 62
CORRECT TEXT
Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The
user: tom's login shell should be non-interactive.
Answer:
Explanation:
# useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
(Show the login shell)
OR
# system-config-users
NEW QUESTION # 63
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NEW QUESTION # 64
SIMULATION
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart
2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
ifdown eth0
ifup eth0
NEW QUESTION # 65
Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.
Answer:
Explanation:
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION # 66
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
Explanation:
see explanation below.
Explanation
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1 DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)
NEW QUESTION # 67
Find all lines in the file /usr/share/dict/words that contain the string seismic. Put a copy of all these lines in their original order in the file /root/wordlist. /root/wordlist should contain no empty lines and all lines must be exact copies of the original lines in /usr/share/dict/words.
Answer:
Explanation:
grep seismic /usr/share/dict/words> /root/wordlist
NEW QUESTION # 68
Install the appropriate kernel update from http://server.domain11.example.com/pub/updates.
The following criteria must also be met:
The updated kernel is the default kernel when the system is rebooted
The original kernel remains available and bootable on the system
Answer:
Explanation:
ftp server.domain11.example.com Anonymous login
ftp> cd /pub/updates ftp> ls
ftp> mget kernel* ftp> bye
rpm -ivh kernel*
vim /etc/grub.conf
Check the updatted kernel is the first kernel and the orginal kernel remains available. set default=0 wq!
NEW QUESTION # 69
A
YUM repository has been provided at http://server.domain11.example.com/pub/x86_64/Server.
Configure your system to use this location as a default repository.
Answer:
Explanation:
see explanation below.
Explanation
vim/etc/yum.repos/base.repo
[base]
name=base
baseurl
http://server.domain11.example.com/pub/x86_64/Server
gpgcheck=0
enable=1
Save and Exit
Use yum list for validation, the configuration is correct if list the package information. If the Yum configuration is not correct then maybe cannot answer the following questions.
NEW QUESTION # 70
There is a local logical volumes in your system, named with shrink and belong to VGSRV volume group, mount to the /shrink directory. The definition of size is 320 MB.
Requirement:
Reduce the logical volume to 220 MB without any loss of dat
a. The size is allowed between 200-260 MB after reducing.
Answer:
Explanation:
cd;umount /shrink
e2fsck -f /dev/mapper/vgsrv-shrink
resize2fs /dev/mapper/vgsrv-shrink 220M
lvreduce -L 220M /dev/mapper/vgsrv-shrink
mount -a
NEW QUESTION # 71
......
What Career Prospects Are Open to Certified Professionals?
When you have this certification, you'll be eligible for numerous IT positions. All the following career choices below are open to you:
- Systems Engineer;
- Site Reliability Engineer (SRE);
- Development Operations (DevOps) Engineer;
- Systems Administrator;
- Solutions Architect.
- Linux System Administrator;
Moreover, all these jobs pay giant salaries. According to PayScale.com, the average annual income of a Linux System Administrator is $74,081 and that of a DevOps Engineer is $95,094. The yearly earnings of a System Administrator are anywhere between $45,000 and $88,000, while the salary per annum for a Systems Engineer can be as high as $80,458. A Site Reliability Engineer (SRE) can earn an average amount of $117,417 annually, while the average yearly payout of a Unix System Administrator is $77,474. Lastly, the annual income of a Solutions Architect can reach $118,833. If you were doubting whether it's worth becoming a Red Hat Certified Systems Administrator, then these high monetary figures should convince you to do so.
The Red Hat EX200 certification exam is the first step towards becoming a Red Hat Certified System Administrator. EX200 exam tests an individual's knowledge and skills in managing and configuring Red Hat Enterprise Linux systems. EX200 exam is designed to evaluate an individual's ability to perform tasks related to system administration, such as installing and configuring Red Hat Enterprise Linux, managing users and groups, and configuring network services.
Updated Official licence for EX200 Certified by EX200 Dumps PDF: https://www.testkingfree.com/RedHat/EX200-practice-exam-dumps.html
Newly Released EX200 Dumps for RHCSA Certified: https://drive.google.com/open?id=1WHv6CYKP9KB9PtIwMu3WeMqlOLPNwQi4