Updated Nov-2025 Test Engine to Practice 300-410 Test Questions
300-410 Real Exam Questions Test Engine Dumps Training With 615 Questions
Cisco 300-410 exam, also known as Implementing Cisco Enterprise Advanced Routing and Services, is a certification exam that validates knowledge and skills required for implementing and troubleshooting advanced routing technologies and services in enterprise networks. 300-410 exam is part of the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification and is intended for network professionals with experience in enterprise networking.
NEW QUESTION # 88
Refer to Exhibit.
Which statement about redistribution from BGP into OSPF process 10 is true?
- A. Network 10.10 10.0/24 is not redistributed into OSPF
- B. Network 172.16.1.0/24 is redistributed with administrative distance of 1.
- C. Network 172.16.1.0/24 is not redistributed into OSPF.
- D. Network 10.10.10.0/24 is redistributed with administrative distance of 20.
Answer: C
NEW QUESTION # 89
What does the PE router convert the Ipv4 prefix to within an MPLS VPN?
- A. prefix that combines the ASN, PE router-id, and IP prefix
- B. 48-bit route combining the IP and PE router-id
- C. eBGP path association between the PE and CE sessions
- D. VPN-IPv4 prefix combined with the 64-bit route distinguisher
Answer: D
Explanation:
NEW QUESTION # 90
Refer to the exhibit.
An administrator that is connected to the console does not see debug messages when remote users log in.
Which action ensures that debug messages are displayed for remote loggings?
- A. Enter the aaa new-model configuration command.
- B. Enter the transport input ssh configuration command.
- C. Enter the logging console debugging configuration command.
- D. Enter the terminal monitor exec command.
Answer: B
NEW QUESTION # 91
Refer to the exhibit.
A junior engineer configured SNMP to network devices. Malicious users have uploaded different configurations to the network devices using SNMP and TFTP servers.
Which configuration prevents changes from unauthorized NMS and TFTP servers?
- A. access-list 20 permit 10.221.10.11access-list 20 deny any log!snmp-server group NETVIEW v3 priv read NETVIEW access 20snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20snmp-server community Cisc0Us3r RO 20snmp-server community Cisc0wrus3r RW 20snmp- server tftp-server-list 20
- B. access-list 20 permit 10.221.10.11
- C. access-list 20 permit 10.221.10.11access-list 20 deny any log!snmp-server group NETVIEW v3 priv read NETVIEW access 20snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20snmp-server community Cisc0wrus3r RO 20snmp-server community Cisc0Us3r RW 20snmp- server tftp-server-list 20
- D. access-list 20 permit 10.221.10.11access-list 20 deny any log
Answer: A
NEW QUESTION # 92
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 93 
Refer to the exhibit. The administrator is troubleshooting a BGP peering between PE1 and PE3 that is unable to establish Which action resolves the issue?
- A. Remove the traffic filtering rules on P2 blocking the BGP communication between PE1 and PE3
- B. P2 must have a route to PE3 to establish a BGP session to PE1
- C. Ensure that the PE3 loopback address is used as a source for BGP peering to PE1
- D. Disable sending ICMP unreachables on P2 to allow PE1 to establish a session with PE3
Answer: C
NEW QUESTION # 94
A company is looking to implement VPN between their Head Quarter and over 100+ Branch Offices. They are looking for a solution that:
1. Reduces deployment complexity
2. Simplifies branch communications
3. Offers branch to branch connectivity.
4. Is cost effective
5. Offers strong encryption
Select the best option from the below options that you would recommend to implement.
- A. DMVPN
- B. MPLS
- C. GRE
- D. IPSEC
Answer: A
NEW QUESTION # 95
A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically Which configuration meets this requirement at the hub router?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 96
Drag and drop the MPLS VPN device types from me left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 97
Refer to the exhibit.
R1 is configured with uRPF, and ping to R1 is failing from a source present in the R1 routing table via the GigatxtEthernet 0/0 interface. Which action resolves the issue?
- A. Enable Cisco Express Forwarding to ensure that uRPF is functioning correctly
- B. Modify the uRPF mode from strict to loose
- C. Add a floating static route to the source on R1 to the GigabitEthernet 0/1 interface
- D. Remove the access list from the interface GigabrtEthernet 0/0
Answer: B
NEW QUESTION # 98
Refer to the exhibit.
R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1. What action will fix the issue?
- A. Replace the SFP module because it is not supported.
- B. Fix route dampening configured on the router.
- C. Fix IP Event Dampening configured on the interface.
- D. Correct the IP SLA probe that failed.
Answer: C
Explanation:
NEW QUESTION # 99
Refer to the exhibit.
An engineer receives this error message when trying to access another router m-band from the serial interface connected to the console of R1. Which configuration is needed on R1 to resolve this issue?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: B
Explanation:
Explanation
https://community.cisco.com/t5/other-network-architecture/out-of-band-router-access/td-p/333295 The "transport output none" command prevents any protocol connection made from R1.
Therefore our SSH connection to 192.168.12.2 was refused. In order to fix this problem we can configure "transport output ssh" under "line console 0" of R1.
Note: The parameter "-l" specifies the username to log in as on the remote machine.
NEW QUESTION # 100
Refer to the exhibit.
An engineer must establish multipoint GRE tunnels between hub router R6 and branch routers R1, R2, and R3. Which configuration accomplishes this task on R1?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
We have an example of how to configure DMVPN Phase II and we show the configuration here for your reference:
Diagram Description automatically generated
DMVPN Phase II - Dynamic Mapping
Text Description automatically generated
Note: Although Phase II - Dynamic Mapping is "dynamic" but we still need to add a static entry for the hub because without that entry, the NHRP registration cannot be sent.
NEW QUESTION # 101 
Refer to the exhibit. Which configuration is required for R2 to get the IP address from the DHCP server?
- A. ip access-list extended R2WANpermit udp any any eq 68
- B. ip access-list extended R2WANpermit tcp any any eq 68
- C. interface GigabitEthernet0/0ip access-group R2WAN out
- D. ip access-list extended R2WANpermit udp any any eq 67
Answer: A
NEW QUESTION # 102 
Refer to the exhibit. An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?
- A. Configure the tog uptime option
- B. Configure the msec option
- C. Configure the timezone option
- D. Configure the debug uptime option
Answer: A
NEW QUESTION # 103
The network administrator configured R1 for Control Plane Policing so that the inbound Telnet traffic is policed to 100 kbps. This policy must not apply to traffic coming in from 10.1.1.1/32 and 172.16.1.1/32. The administrator has configured this:
The network administrator is not getting the desired results. Which set of configurations resolves this issue?
- A. no access-list 101
access-list 101 deny tcp host 10,1,1.1 any eq 23
access-list 101 deny tcp host 172,16.1.1 any eq 23
access-list 101 permit ip any any - B. control-plane
no service-policy input PM-CoPP
service-policy input PM-CoPP - C. control-plane
no service-policy input PM-CoPP
!
interface Ethernet 0/0
service-policy input PM-CoPP - D. no access-list 101
access-list 101 deny tcp host 10,1.1.1 any eq 23
access-list 101 deny tcp host 172.16.1.1 any eq 23
access-list 101 permit ip any any
!
Answer: A
Explanation:
interface E0/0
service-policy input PM-CoPP
Explanation:
Packets that match a deny rule are excluded from that class and cascade to the next class (if one exists) for classification. Therefore if we don't want to CoPP traffic from 10.1.1.1/32 and
172.16.1.1/32, we must "deny" them in the ACL.
NEW QUESTION # 104
Refer to the exhibit.
While troubleshooting an EIGRP neighbor adjacency problem, the network engineer notices that the interface connected to the neighboring router is not participating in the EIGRP process. Which action resolves the issues?
- A. Configure the network command under EIGRP address family vrf CLIENT1
- B. Configure the network command under EIGRP address family ipv4
- C. Configure EIGRP metrics on interface FastEthernet0/3
- D. Configure the network command to network 172.16.0.1 0.0.0.0
Answer: A
Explanation:
router eigrp 1
...
!
address-family ipv4 vrf CLIENT1
network 172.16.0.0 0.0.0.255
no auto-summary
autonomous-system 1
exit-address-family
NEW QUESTION # 105
Which two statements about VRF-Lite configurations are true? (Choose two.)
- A. Each customer has its own private routing table.
- B. Different customers can have overlapping IP addresses on different VPNs
- C. They support IS-IS
- D. Each customer has its own dedicated TCAM resources
- E. They support a maximum of 512.000 routes
- F. They support the exchange of MPLS labels
Answer: A,B
NEW QUESTION # 106
Refer to the exhibit.
An engineer must configure a LAN-to-LAN IPsec VPN between R1 and the remote router. Which IPsec Phase 1 configuration must the engineer use for the local router?
- A. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 199.1.1.1 - B. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123! address 199.1.1.1 - C. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
!
crypto isakmp key cisco123 address 200.1.1.3 - D. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 200.1.1.3
Answer: C
Explanation:
In the "crypto isakmp key ... address " command, the address must be of the IP address of the other end (which is 200.1.1.3 in this case) so Option A and Option B are correct. The difference between these two options are in the hash SHA or MD5 method but both of them can be used although SHA is better than MD5 so we choose Option A the best answer.
Note: Cisco no longer recommends using 3DES, MD5 and DH groups 1, 2 and 5.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_imgmt/configuration/xe-16-
5/sec-ipsec-management-xe-16-5-book/sec-ipsec-usability-enhance.html
NEW QUESTION # 107
......
What's Next After Cisco ENARSI?
Once you have passed the Cisco ENARSI 300-410 exam, assuming you have already passed the core 350-401 ENCOR test, and have been awarded the prestigious CCNP Enterprise certification, you get new prospects for professional improvement. Earning this certificate automatically earns you the right to boast about it on social media platforms such as LinkedIn to attract more and more job offers with high paying salaries. CCNP Enterprise is valid for a total of 3 years, after which recertification should be done by keeping up with educational activities offered by Cisco or completing exams. Finally, one can also opt for expert-level certifications such as CCIE Enterprise Infrastructure or CCIE Enterprise Wireless. Each of them requires applicants to only pass one extra lab exam.
300-410 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.testkingfree.com/Cisco/300-410-practice-exam-dumps.html
300-410 Exam questions and answers: https://drive.google.com/open?id=1hoZEh8UWEGO167_jdy3uzIMqIzcSqj7Z