Enhance Your Career With Available Preparation Guide for 156-582 Exam
Get Special Discount Offer of 156-582 Certification Exam Sample Questions and Answers
CheckPoint 156-582 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION # 24
UserCenter/PartnerMAP access is based on what criteria?
- A. The certification level achieved by the partner.
- B. The certification level achieved by employees of an organization.
- C. The level of Support purchased by a company manager.
- D. User permissions assigned to company contacts.
Answer: D
Explanation:
Access toUserCenterandPartnerMAPis primarily based on theuser permissions assigned to company contacts. These permissions dictate what information and functionalities users can access within the portals, ensuring that only authorized personnel can view or manage specific aspects of the Check Point services and products.
NEW QUESTION # 25
To verify that communication is working between the Security Management Server and the Security Gateway, which service port should be checked?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Port257is used for log collection and communication between the Security Management Serverand the Security Gateway. Verifying that this port is open and accessible ensures that logs are successfully transmitted from the gateway to the management server, facilitating effective monitoring and analysis.
NEW QUESTION # 26
Customer wants to use autonomous threat prevention. How do you enable it?
- A. Enable Autonomous Threat Prevention on the Security Gateway from the SmartConsole: Gateway and Servers view and enable IPS on the Security Gateway by the command: ips on.
- B. Enable Autonomous Threat Prevention on the Security Gateway from the SmartConsole: Gateway and Servers view, then select inspection profile.
- C. Enable Autonomous Threat Prevention on the Security Gateway from the SmartConsole:Gateway and Servers view, the default profile Strict Security will be selected.
- D. Enable Autonomous Threat Prevention on the Security Gateway from the SmartConsole: Gateway and Servers view, inspection profile is not needed, the Security Gateway will automatically select the best profile according to deployment.
Answer: B
Explanation:
To enableAutonomous Threat Preventionon a Security Gateway, navigate to theGateway and Serversview in SmartConsole, enable the feature, and thenselect an appropriate inspection profile. Selecting the inspection profile allows administrators to define the level of threat prevention and customize the security measures based on the organization's specific needs and deployment scenarios.
NEW QUESTION # 27
The Check Point FW Monitor tool captures and analyzes incoming packets at multiple points in the traffic inspections. Which of the following is the correct inspection flow for traffic?
- A. (1) - pre-inbound, (i) - post-inbound, (O) - pre-outbound, (o) - post-outbound
- B. (o) - pre-outbound, (O) - post-inbound, (i) - pre-inbound, (I) - post-inbound
- C. (O) - post-outbound, (o) - pre-outbound, (I) - post-inbound, (i) - pre-inbound
- D. (i) - pre-inbound, (I) - post-inbound, (o) - pre-outbound, (O) - post-outbound
Answer: D
Explanation:
The correct inspection flow using fw monitor is:
* (i) - pre-inbound: Before the packet enters the inbound processing path.
* (I) - post-inbound: After the inbound processing.
* (o) - pre-outbound: Before the packet enters the outbound processing path.
* (O) - post-outbound: After the outbound processing.
This sequence ensures that packets are captured and analyzed at all critical points during their traversal through the firewall.
NEW QUESTION # 28
You were asked to set up logging for a rule to log a full list of URLs when the rule hits in the Rule Base.
How do you accomplish that?
- A. Set Extended logging under rule log type
- B. For URL logging you need to modify blade settings of URL filtering blade under SmartConsole, Manage & Settings, blades, URL filtering
- C. Click on the rule, column logging and set "log URL" under application control blade layer
- D. All URLs are logged by default
Answer: A
Explanation:
To log a full list of URLs when a specific rule is triggered in the Rule Base, you shouldset Extended logging under the rule's log type. This configuration ensures that detailed information, including the URLs accessed, is captured in the logs whenever the rule is matched. This level of logging provides comprehensive visibility into user activities and helps in detailed auditing and analysis.
NEW QUESTION # 29
Which of the following is a valid way to capture packets on Check Point gateways?
- A. tcpdump
- B. Firewall logs
- C. Wireshark
- D. Network taps
Answer: A
Explanation:
tcpdumpis a valid and commonly used tool for capturing packets on Check Point gateways. It allows administrators to capture and analyze network traffic directly from the command line. While Wireshark can be used to analyze the captured packets, the actual capture is typically performed using tcpdump. Network taps are hardware devices and not software methods, and firewall logs provide event logging rather than packet-level capture.
NEW QUESTION # 30
What is the name of the Software Blade Package containing CDR (Content Disarm & Reconstruction) and Zero Day protection?
- A. NGTX - Next Generation Threat Prevention and Extraction
- B. TE - Threat Emulation
- C. NGTP - Next Generation Threat Prevention
- D. SNBT - Sandblast
Answer: A
Explanation:
TheNGTX (Next Generation Threat Prevention and Extraction)Software Blade Package includes advanced security features likeCDR (Content Disarm & Reconstruction)andZero Day Protection. This package enhances the security posture by disarming potentially malicious contentand protecting against newly discovered threats that exploit unknown vulnerabilities.
NEW QUESTION # 31
Which of the following is NOT a way to insert fw monitor into the chain when troubleshooting packets throughout the chain?
- A. Absolute position
- B. Relative position using location
- C. Relative position using alias
- D. Relative position using id
Answer: C
Explanation:
When using fw monitor for packet capture in Check Point environments, packets can be monitored at various points in the inspection chain. The insertion methods include specifying a relative position using an identifier (id), using an absolute position, or specifying the position based on location within the chain. However, using an alias to determine the relative position isnota recognized method for inserting fw monitor into the inspection chain.
NEW QUESTION # 32
You need to verify the license on Security Gateway. What command can you use from the command line?
- A. cplic list
- B. cplic print
- C. cplic -I
- D. sh lie stat
Answer: B
Explanation:
To verify the license on a Security Gateway, thecplic printcommand is used. This command displays the current licensing information, including the status and details of installed licenses, ensuring that the gateway has the necessary permissions and features enabled for its operation.
NEW QUESTION # 33
When running a debug with fw monitor, which parameter will create a more verbose output?
- A. -D
- B. V
- C. -i
- D. -I
Answer: A
Explanation:
The-Dparameter in thefw monitorcommand is used to enablemore verbose output. This parameter increases the level of detail provided in the debug output, allowing administrators to gain deeper insights into packet processing and troubleshooting network issues more effectively.
NEW QUESTION # 34
After deploying a new Static NAT configuration, traffic is not getting through. What command would you use to verify that the proxy ARP configuration has been loaded?
- A. cp ctl arp
- B. fw ctl conn
- C. fw ctl arp
- D. fw arp ctl
Answer: C
Explanation:
To verify theProxy ARPconfiguration after deploying a new Static NAT setup, thefw ctl arpcommand is used. This command displays the current ARP table entries, allowing administrators to confirm that the proxy ARP entries corresponding to the Static NAT mappings have been correctly loaded and are active.
NEW QUESTION # 35
What is the port for the Log Collection on Security Management Server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Port257is used for log collection on the Security Management Server. This port facilitates the transmission of log data from Security Gateways to the Management Server, ensuring that logs are centralized for monitoring, analysis, and reporting.
NEW QUESTION # 36
After deploying a Hide NAT for a new network, users are unable to access the Internet. What command would you use to check the internal NAT behavior?
- A. cp ctl kdebug + xlate xltrc nat
- B. fw ctl kdebug + xlate xltrc nat
- C. fw ctl zdebug + xlate xltrc nat
- D. cp ctl zdebug + xlate xltrc nat
Answer: C
Explanation:
To troubleshoot NAT behavior, especially after deploying a Hide NAT configuration, thefw ctl zdebug + xlate xltrc natcommand is used. This command provides detailed debug information about NAT translations, allowing administrators to verify that internal addresses are being correctly translated and that the NAT rules are functioning as intended.
NEW QUESTION # 37
When is the Enable Bypass Under Load used in IPS?
- A. When there is an ongoing attack, the Security Gateway puts its state to maintenance mode to prevent attackers from breaching the network
- B. When there is a problem with IPS and connectivity cannot be guaranteed
- C. When the threshold is reached for CPU and memory
- D. When the threshold is reached for connections and throughput
Answer: C
Explanation:
Enable Bypass Under Loadin Intrusion Prevention Systems (IPS) is used when the system reaches high thresholds for CPU and memory usage. This feature allows the IPS to bypass certain processing to maintain overall system performance and ensure that essential network functions continue operating smoothly despite resource constraints.
NEW QUESTION # 38
What are the available types of licenses in Check Point?
- A. Free, Evaluation, Annual, Lifetime
- B. Evaluation, Perpetual, Trial, Subscription
- C. Annual, Perpetual, Test, Free
- D. Evaluation, Perpetual, Test, Free
Answer: B
Explanation:
Check Point offers several types of licenses to cater to different customer needs:
* Evaluation: Short-term licenses for testing and evaluation purposes.
* Perpetual: Licenses that are valid indefinitely, typically involving a one-time purchase.
* Trial: Temporary licenses that allow full functionality for a limited period.
* Subscription: Licenses that are valid for a specific duration (e.g., annual) and require renewal.
These licensing options provide flexibility for organizations to choose based on their operational requirements and budget constraints.
NEW QUESTION # 39
The URL filtering cache limit exceeded. What issues can this cause?
- A. Resource Advisor (RAD) process on the Security Gateway consumes close to 100 percent of the CPU
- B. When URL filtering cache exceeds the limit, it will be disabled temporarily to overcome instability of the system
- C. RAD process will spawn multiple times to help populate the cache
- D. Nothing, the Security Gateway dynamically raises the cache when needed
Answer: A
Explanation:
When theURL filtering cache limit is exceeded, theResource Advisor (RAD)process can consume nearly
100% of the CPU. This high CPU usage can lead to system instability and degrade the performance of the Security Gateway. It is crucial to monitor and manage cache limits to prevent such performance issues, ensuring that the URL filtering functionality operates smoothly without overloading system resources.
NEW QUESTION # 40
What is the correct process for GUI connectivity issues with SmartConsole troubleshooting?
- A. Processes (FWM and CPM), Connectivity, GUI clients, Certificate, Authentication
- B. First troubleshoot Authentication and then the rest
- C. Reinstall the SmartConsole and check if it's running properly
- D. Connectivity, Processes (FWM and CPM), GUI clients, Certificate, Authentication
Answer: D
Explanation:
The correct troubleshooting process for GUI connectivity issues with SmartConsole involves the following steps in order:
* Connectivity: Ensure that the network connection between SmartConsole and the Management Server is stable.
* Processes (FWM and CPM): Verify that critical processes like FWM (Firewall Manager) and CPM (Check Point Management) are running correctly.
* GUI Clients: Check the client-side configurations and ensure that SmartConsole is properly installed and configured.
* Certificate: Ensure that the necessary certificates for secure communication are valid and correctly installed.
* Authentication: Confirm that user authentication mechanisms are functioning as expected.
Following this structured approach ensures that all potential issues are systematically addressed.
NEW QUESTION # 41
......
Updated 156-582 Dumps Questions Are Available For Passing CheckPoint Exam: https://www.testkingfree.com/CheckPoint/156-582-practice-exam-dumps.html
New 156-582 Dumps For Preparing CCTA Certified CheckPoint Exam Well: https://drive.google.com/open?id=1r9IfiCp7tEgMHBPcw5qYV678Nw7MXWon