We have attentive service

GB0-371-ENU exam torrent is available in PDF, software, and online three modes, which allowing you to switch learning materials on paper, on your phone or on your computer, and to study anywhere and anytime. And in any version of GB0-371-ENU practice test, the number of downloads and the number of people used at the same time are not limited. You can practice repeatedly for the same set of questions and continue to consolidate important knowledge points. Before you purchase the system, GB0-371-ENU practice test provides you with a free trial service, so that customers can fully understand our system before buying; after the online payment is successful, you can receive mail from customer service in 5 to 10 minutes, and then immediately begin to learn GB0-371-ENU training prep.

Although the H3C certificate is good, people who can successfully obtain each year are rare, and the difficulty of the GB0-371-ENU exam and the pressure of study usually make the students feel discouraged. However, for us, these will no longer be a problem. In the past few years, our team has ushered in hundreds of industry experts, experienced numerous challenges day and night, and finally formed complete learning products--GB0-371-ENU exam torrent, which is tailor-made for students who want to obtain the certificate. Our platform has the following features:

DOWNLOAD DEMO

We have high quality guarantee

Our website is a very secure and regular platform. We can provide high quality assurance. Firstly, we guarantee the security of the company's website whiling purchasing process of GB0-371-ENU exam torrent. The products downloaded and installed do not contain viruses. We also provide professional personnel to remotely guide the installation and use if needed. Secondly, for all customer information about purchasing GB0-371-ENU practice test, we will be maintained by specialized personnel and absolutely no information disclosure will occur. To the last but also the most important, our exam materials have the merit of high quality based on the high pass rate as 98% to 100%. The data speak louder than the other words. You should be confident with our GB0-371-ENU training prep.

We have an authoritative production team

GB0-371-ENU practice test is high quality product revised by hundreds of experts according to the changes in the syllabus and the latest developments in theory and practice, it is focused and well-targeted, so that each student can complete the learning of important content in the shortest time. With GB0-371-ENU training prep, you only need to spend 20 to 30 hours of practice before you take the exam. In addition, the platform has dedicated experts who update all new data content on a daily basis if we get new information. Therefore, using, you don't need to worry about missing any exam focus.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the switching network as shown in the figure, VLAN10 is set as Super VLAN on the switch SWA, VLAN2 and VLAN3 are Sub VLANs of VLAN10, port Ethernet1/0/3 is Trunk port, PVID is VLAN1, allowing all VLANs to pass through; Create VLAN2~VLAN20 on SWB, port Ethernet1/0/4 as Trunk port, PVID is VLAN1, allow all VLANs by setting the IP address of each device as shown in the figure, you can judge _ the following statement is correct

A) The PCA message enters from the Ethernet1/0/1 port of SWA, and the VLANTag that comes out from the Ethernet1/0/3 port is VLAN2
B) PCA packets enter from the SWA Ethernet1/0/1 port, and come out from Ethemet1/0/3 port with VLAN Tag VLAN 1
C) The PCA message enters from the Ethernet1/0/1 port of SWA, and the VLANTag that comes out from the Ethernet1/0/3 port is VLAN 10
D) PCA packets enter from SWA's Ethernet1/0/1 port, and come out from Ethemet1/0/3 port without tag

2. In the networking shown in the figure, the PIM SM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1, and there is a downstream receiver RT3 connected to a multicast source, check the RT3 unicast routing table as follows:
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 10 Routes: 10
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.0.1 S0/2/0
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, after the RP sends the registration stop message, which of the following routers have (S, G) entries?

A) RT1
B) RT2
C) RT3

3. Regarding the P/A mechanism of MSTP, the correct statement is

A) In the figure, by default, the SWA port E1/0/1 needs to wait twice the duration of the Forward Delay before it can enter the Forwarding state
B) In MSTP, the downstream device only responds to the BPDU with the Agreement set when it receives the BPDU with both Proposal and Agreement set from the upstream device.
C) Both RSTP and MSTP require the designated port of the upstream device to perform rapid migration after receiving the Agreement message from the downstream device
D) By configuring stp no-agreement-check on the port, the MSTP switch will not check whether the Agreement bit is set in the Proposal BPDU sent upstream

4. Regarding the port status and role in RSTP, what are the correct statements?

A) There are three states for the port in RSTP. After the port enters the Learning state, it starts to send and receive BPDUs and determine the port role.
B) The Alternate port in RSTP is used to back up the root port, and the Backup port is used to back up the designated port.
C) The definition of the root port and designated port in RSTP is the same as that in STP
D) The Discarding port in RSTP is like the Blocking port in STP. When the port is in the Discarding state, it will not send BPDUs, but will accept BPDUs.

5. Before configuring the bpdu-tunnddotlq stp command on the port where the QinQ function of the H3C series switch is enabled, the command that must be configured on this port is

A) stp disable

Solutions: